Author Topic: Oppresive Clouds.tgc  (Read 6375 times)

Offline dandelO

  • Member
  • *
  • Posts: 2401
Oppresive Clouds.tgc
« on: June 30, 2010, 02:01:36 AM »
No idea what you'd call these big ugly looking buggers but, I think they're decent enough to share as a thick, nondescript, oppressive cloud layer.

25401-0

I've been enjoying delving back into TG2 clouds for the last wee while now. These are a recent offshoot from my years-long wrestling match with my old mammatus files, those still aren't ready yet to be shared, it's a long fight, one that I am constantly rethinking...

Anyway, back to a short descriptive note on these then. A simple cloud layer, 2 density fractals - one large and flat that leaves a few gaps in the sky, to be partially filled-in by the secondary fractal, via inverted blending of the flat fractal.

Not pretty but another good method of using more than one density fractal per single cloud layer.
With some crafty blending and distribution, many different fractals can be applied quite convincingly to a single layer, giving a huge range of available scales and noise.

* Another handy cloud tip, unrelated to this but used in my cumulus fractus layer; Using a surface layer, or distribution shader, as a blender to a fractal(or making the fractal a child, as I'd do) is a good way to get wide, varied scales/noise over a cloud's vertical forms. Use 'Y for altitude' in the surface layer. The 'cloud altitude' is the centre of your cloud layers, measure outwards from that altitude in either, or both directions(minimum/maximum height constraints) to apply specific features from varying density fractals across the Y axis of the cloud layer. :)

Cheers! :)
« Last Edit: June 25, 2012, 01:16:09 PM by dandelO »

Offline Oshyan

  • Planetside Staff
  • *
  • Posts: 12226
  • Holy snagging ducks!
Re: Oppresive Clouds.tgc
« Reply #1 on: June 30, 2010, 05:50:20 AM »
Those are quite nice looking. I especially like the gap where the light is shining through. Honestly it does look like a start to mammatus clouds...

- Oshyan

Offline Dune

  • Terragen Alpha Tester (Win)
  • ***
  • Posts: 13765
  • Corkscrew Bird
    • www.ulco-art.nl
Re: Oppresive Clouds.tgc
« Reply #2 on: June 30, 2010, 06:55:09 AM »
I just got a 'brilliant' idea. What if you redirect/transform the cloud layer downwards blended by a perlin with the suitable fractal (a bit even)... I have to do some cloudwork again if I see this.

---Dune

edit: on the other hand, the clouds will be restricted by the cloud height... and won't be pushed downward. Rethink.
« Last Edit: June 30, 2010, 06:57:22 AM by Dune »
In case you still haven't seen enough of my work: www.ulco-art.nl

Offline domdib

  • Member
  • *
  • Posts: 1777
Re: Oppresive Clouds.tgc
« Reply #3 on: June 30, 2010, 09:30:53 AM »
Thanks for sharing - both the clip and the hints.

Offline dandelO

  • Member
  • *
  • Posts: 2401
Re: Oppresive Clouds.tgc
« Reply #4 on: June 30, 2010, 02:21:54 PM »
Cheers, folks. I have other mammatus files, where each cell is far more pronounced than these. A close scaled fractal would do it. I have many attempts(including the way you describe, Ulco). You don't need to worry about the clouds not being pushed downward, if you use the controls; 'flatter base' and 'invert profile' in your layer then, each mammatus 'finger' will extend downwards, leaving a nice flat top to the layer that will absorb lots of even sunlight to be bounced around the very dense layer, mammatus usually appear in a completely cloud covered sky, you need not see the top of the layer...

Offline inkydigit

  • Terragen Alpha Tester (Mac)
  • ***
  • Posts: 5169
  • 🍄🍄🍄
    • inkydigit's website
Re: Oppresive Clouds.tgc
« Reply #5 on: June 30, 2010, 08:34:05 PM »
very nice, cheers again!

Offline airflamesred

  • Member
  • *
  • Posts: 294
Re: Oppresive Clouds.tgc
« Reply #6 on: July 01, 2010, 10:49:18 PM »
Excellent thank you

Offline Kadri

  • Member
  • *
  • Posts: 8288
Re: Oppresive Clouds.tgc
« Reply #7 on: July 06, 2010, 01:39:43 AM »

Thanks  :)

Offline nethskie

  • Member
  • *
  • Posts: 105
  • finally now!
    • nethskie.deviantart.com
Re: Oppresive Clouds.tgc
« Reply #8 on: September 06, 2010, 12:51:01 AM »
you gave me an idea on this! thanks for sharing!

Offline choronr

  • Member
  • *
  • Posts: 4582
Re: Oppresive Clouds.tgc
« Reply #9 on: September 15, 2010, 02:23:19 AM »
Thank you Martin; you're making us all better with sharing your creativity. This has some great possibilities with the change of seasons coming shortly.

Offline rcallicotte

  • Member
  • *
  • Posts: 9542
Re: Oppresive Clouds.tgc
« Reply #10 on: October 18, 2010, 11:03:44 PM »
Wow.  These are awesome.  Can't wait to try.
So this is Disney World.  Can we live here?

Offline Danny

  • Terragen Alpha Tester (Win)
  • ***
  • Posts: 1554
    • New World Digital Art
Re: Oppresive Clouds.tgc
« Reply #11 on: January 09, 2011, 03:11:28 PM »
Thks Martin thats a pretty intense looking sky

Offline D.A. Bentley

  • Member
  • *
  • Posts: 179
    • D.A. Bentley
Re: Oppresive Clouds.tgc
« Reply #12 on: February 06, 2018, 01:13:23 PM »
Did the tgc get deleted?  I don't see a download.

Offline bobbystahr

  • Member
  • *
  • Posts: 9096
  • Turn, and face the Strange Ch Ch Changes...D Bowie
Re: Oppresive Clouds.tgc
« Reply #13 on: February 07, 2018, 12:47:43 AM »
Did the tgc get deleted?  I don't see a download.

Dandel0 tends to purge things periodically I've noticed.
something borrowed,
something Blue.
Ring out the Old.
Bring in the New

bobbystahr

Offline D.A. Bentley

  • Member
  • *
  • Posts: 179
    • D.A. Bentley
Re: Oppresive Clouds.tgc
« Reply #14 on: February 07, 2018, 03:23:02 AM »
Thanks bobby!  I was just "lurking" through the Cloud Library and noticed that as well too.