Author Topic: Hardware question  (Read 220 times)

Offline archonforest

  • Member
  • *
  • Posts: 3909
  • !AMIGA RULEZ!
Hardware question
« on: December 24, 2018, 03:46:14 PM »
I cannot figure out something. My workstation got only SATA II connection. Now I found a PCI-E card that gives SATA III connection. So can I just plug my SSD to this card and have the full speed of the ssd?
Dell T5500 with Dual Hexa Xeon CPU 3Ghz, 32Gb ram
Amiga 1200 8Mb ram, 8Gb ssd

Offline PabloMack

  • Member
  • *
  • Posts: 1124
  • Evil men will be fed to the dinosaurs.
    • An Adventure in Technology
Re: Hardware question
« Reply #1 on: December 27, 2018, 10:51:33 PM »
You should be able to.

Offline archonforest

  • Member
  • *
  • Posts: 3909
  • !AMIGA RULEZ!
Re: Hardware question
« Reply #2 on: December 28, 2018, 12:13:11 PM »
Thx Pablo. I ordered the card. Lets see if will have more data transfer. My current ssd on Sata II port read and writes about 250Mb/sec. This is not bad at all but if I can double that with the Sata III port... :D
Dell T5500 with Dual Hexa Xeon CPU 3Ghz, 32Gb ram
Amiga 1200 8Mb ram, 8Gb ssd