Author Topic: "Mont Fuji"  (Read 5198 times)

Offline Phylloxera

  • Member
  • *
  • Posts: 652
"Mont Fuji"
« on: August 08, 2008, 02:45:30 PM »
Does somebody among you have to you it “Fuji mount” in file DEM or TG ?
Thank you in advance!

Offline Chinaski

  • Member
  • *
  • Posts: 103
Re: "Mont Fuji"
« Reply #1 on: August 08, 2008, 03:14:39 PM »
T'en trouveras un ici (à convertir en .ter avec 3dem)... Malheureusement il y a un très gros défaut sur la pente Ouest. À tel point que je ne pense pas qu'il soit exploitable (à moins de tronquer le volcan en deux et de se contenter de l'autre moitié)(pour une vue lointaine du volcan à l'horizon, par exemple, ça devrait aller). :/
You don't understand me ? That's normal, I don't speak english.

Offline RArcher

  • Member
  • *
  • Posts: 1062
    • Archer Designs
Re: "Mont Fuji"
« Reply #2 on: August 08, 2008, 04:18:21 PM »
You can try this and see if it will work for you.  If I understand correctly what Chinaski is saying (my french is horrible) there were gaps in the SRTM data on the western slope on the mountain.  To fix this I overlayed the higher resolution data on top of some lower resolution data that did not have any gaps.  I have exported this as a 8193 x 8193 .ter file that should work fairly well.

I hope to see what you do with it!

http://www.archer-designs.com/temp/fuji/mount-fuji-8193x8193.7z

You can use 7zip (http://www.7-zip.org/) to extract the .ter file.  It is a 131mb .ter file zipped to 20mb.

Offline Phylloxera

  • Member
  • *
  • Posts: 652
Re: "Mont Fuji"
« Reply #3 on: August 08, 2008, 05:50:31 PM »
T'en trouveras un ici (à convertir en .ter avec 3dem)... Malheureusement il y a un très gros défaut sur la pente Ouest. À tel point que je ne pense pas qu'il soit exploitable (à moins de tronquer le volcan en deux et de se contenter de l'autre moitié)(pour une vue lointaine du volcan à l'horizon, par exemple, ça devrait aller). :/
Lien invalide ?????

Offline Phylloxera

  • Member
  • *
  • Posts: 652
Re: "Mont Fuji"
« Reply #4 on: August 08, 2008, 05:50:50 PM »
You can try this and see if it will work for you.  If I understand correctly what Chinaski is saying (my french is horrible) there were gaps in the SRTM data on the western slope on the mountain.  To fix this I overlayed the higher resolution data on top of some lower resolution data that did not have any gaps.  I have exported this as a 8193 x 8193 .ter file that should work fairly well.

I hope to see what you do with it!

http://www.archer-designs.com/temp/fuji/mount-fuji-8193x8193.7z

You can use 7zip (http://www.7-zip.org/) to extract the .ter file.  It is a 131mb .ter file zipped to 20mb.

Thank You !

 

anything