Print Page - Unknown filter error saving with "Save as..." and replacing file

Title: Unknown filter error saving with "Save as..." and replacing file
Post by: WAS on September 06, 2018, 08:04:06 PM

Got this error when saving the project as a new name replacing an older project. Not sure what it's about. Had been saving (over 24 incremental) in it's original name just fine. Nothing changed in Render 01 besides changing antialiasing method and GI. Running 4.2.10

Code (Render 01) Select

<terragen_clip>
	<render
		name = "Render 01"
		gui_use_node_pos = "1"
		gui_node_pos = "960 -120 0"
		gui_group = "Renderers"
		master = "1"
		image_width = "1200"
		lock_aspect_ratio = "0"
		image_height = "600"
		image_aspect_ratio = "2"
		pixel_aspect_ratio = "1"
		camera = "Render Camera"
		render_layer = ""
		surfaces_visible = "1"
		atmosphere_visible = "1"
		do_shadows = "1"
		detail = "0.6"
		anti-aliasing = "6"
		ray_trace_atmosphere = "1"
		defer_all_shading = "0"
		motion_blur = "1"
		motion_blur_method = "1"
		depth_of_field = "0"
		dof_method = "2"
		GI_relative_detail = "1"
		GI_sample_quality = "3"
		GI_blur_radius = "8"
		supersample_prepass = "0"
		GI_surface_details = "1"
		do_crop_region = "0"
		crop_left = "0"
		crop_right = "0.5011615753"
		crop_bottom = "0.6223776937"
		crop_top = "1"
		crop_to_object = "0"
		crop_object_name = ""
		pixel_filter = "5"
		anti-aliasing_bloom = "1"
		experimental_atmo_bloom = "1"
		atmo_bloom_amount = "0.25"
		atmo_bloom_size = "0.25"
		bloom = "0"
		bloom_amount = "0.1"
		starburst = "0"
		starburst_amount = "0.1"
		starburst_softness = "0.05"
		detail_blending = "0"
		displacement_filter = "1"
		microvertex_jittering = "1"
		detail_jittering = "1"
		soft_clip_effect = "1"
		soft_clip_softness = "1"
		compensate_soft_clip = "1"
		contrast = "1"
		contrast_adjust = "0.35"
		gamma_correction = "2.2"
		maximum_threads = "64"
		ray_detail_region = "1"
		ray_detail_region_padding = "0"
		lock_subdiv_to_frame = "0"
		lock_to_frame_number = "1"
		ray_trace_everything = "0"
		GI_prepass_padding = "0"
		do_reverse_primary_rays = "0"
		reverse_primary_rays_multiplier = "1"
		ray_trace_objects = "1"
		do_ray_traced_shadows = "1"
		output_image_filename = "C:\Users\WAS\Documents\temp.%04d.tif"
		extra_output_images = "0"
		extra_output_image_filename = "C:\Users\WAS\Documents\temp.IMAGETYPE.%04d.tif"
		create_subfolders = "1"
		exr_pixel_type = "1"
		tiff_bits = "8"
		tiff_compression = "1"
		micro_exporter = "0"
		micro_exporter_name = ""
		sequence_first = "1"
		sequence_last = "100"
		sequence_step = "1"
		>
		<render_bucket_controls
			name = "Render bucket controls 01"
			gui_use_node_pos = "1"
			gui_node_pos = "1160 120 0"
			gui_group = ""
			max_bucket_size = "256 256"
			allow_auto_reduction = "1"
			>
		</render_bucket_controls>
		<render_GI_settings
			name = "Render GI settings 01"
			gui_use_node_pos = "1"
			gui_node_pos = "1160 60 0"
			gui_group = ""
			GI_relative_detail = "1"
			GI_cache_detail = "3"
			GI_sample_quality = "3"
			GI_blur_radius = "8"
			supersample_prepass = "0"
			no_GI_cache_file = "1"
			write_to_GI_cache_file = "0"
			GI_cache_filename_to_write = "C:\Users\WAS\Documents\gicache_%04d.gic"
			read_from_GI_cache_file = "0"
			GI_cache_filename_to_read = ""
			GI_cache_blend_mode = "3"
			GI_cache_blend_range = "5"
			GI_prepass_padding = "0"
			GI_surface_details = "1"
			GI_surface_details_method = "1"
			GISD_occlusion_weight = "3"
			GISD_bounce_weight = "3"
			GISD_radius = "24"
			GISD_falloff = "1"
			cloud_GI_quality_preset = "1"
			cloud_GI_max_ray_depth = "2"
			optimise_voxel_scattering = "1"
			voxel_scatter_quality = "50"
			>
		</render_GI_settings>
		<render_pixel_sampler
			name = "Render pixel sampler 01"
			gui_use_node_pos = "1"
			gui_node_pos = "1160 0 0"
			gui_group = ""
			anti-aliasing = "6"
			customise_sampling = "0"
			first_sampling_level = "2"
			pixel_noise_threshold = "0.05"
			>
		</render_pixel_sampler>
		<render_subdiv_settings
			name = "Render subdiv settings 01"
			gui_use_node_pos = "1"
			gui_node_pos = "1160 -60 0"
			gui_group = ""
			fully_adaptive = "1"
			microvertex_jittering = "1"
			force_all_edges = "0"
			detail_jittering = "1"
			detail_blending = "0"
			displacement_filter = "1"
			jitter_shading_points = "1"
			ray_detail_multiplier = "1"
			stabilise_ray_detail_in_motion = "0"
			ray_detail_stabilisation = "3"
			override_size_of_subdiv_cache = "0"
			size_of_subdiv_cache_in_Mb = "1200"
			preallocate_subdiv_cache = "0"
			>
		</render_subdiv_settings>
	</render>
</terragen_clip>

Title: Re: Unknown filter error saving with "Save as..." and replacing file
Post by: Oshyan on September 07, 2018, 07:52:48 PM

We've seen this once before, but could never reproduce it. Are you able to reproduce it reliably?

- Oshyan

Title: Re: Unknown filter error saving with "Save as..." and replacing file
Post by: WAS on September 07, 2018, 11:50:34 PM

I tried saving a project a bunch of times and than overwriting another project and got no error, so I'd say no. Very strange. That's the only behavior I can really think of that triggered it as I never really touched the camera, and i even imported that camera to see.

Planetside Software Forums

Support => Terragen Support => Topic started by: WAS on September 06, 2018, 08:04:06 PM