<terragen_clip>
	<non_node>
		<library_description>Sinus Frequency Function v2 by Jordan Thompson</library_description>
		<library_tag>sinus frequency function v2</library_tag>
		<clip_input_connection node="Terrain Scalar Input" param="input_node" />
		<clip_output_connection node="Sinus Frequency Output" index="0" />
		<library_connection_tips>Terrain or other input goes into Terrain Scalar Input. By default clamping is disabled. Enable this in Use Clamping. Additionally two clamping modes are integrated. Smooth Step and Soft min/max clamping. Sinus Frequency is the overall lean in Negative or Positive. </library_connection_tips>
	</non_node>
	<null_shader
		name = "Sinus Frequency Output"
		gui_use_node_pos = "1"
		gui_node_pos = "120 -320 0"
		gui_group = "Sinus Frequency"
		enable = "1"
		input_node = "Use Clamping or Not"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		>
	</null_shader>
	<arctan_scalar
		name = "Arctan Terrain Scalar"
		gui_use_node_pos = "1"
		gui_node_pos = "140 300 0"
		gui_group = "Sinus Frequency Function"
		enable = "1"
		input_node = "Divide Terrain Sinus by Cosine"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		>
	</arctan_scalar>
	<null_shader
		name = "Terrain Scalar Input"
		gui_use_node_pos = "1"
		gui_node_pos = "-240 1040 0"
		gui_group = "Sinus Frequency Settings"
		enable = "1"
		input_node = "X to scalar 01"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		>
	</null_shader>
	<smooth_step_scalar
		name = "Smooth Step Sinus Frequency"
		gui_use_node_pos = "1"
		gui_node_pos = "40 100 0"
		gui_group = "Sinus Frequency Function"
		enable = "1"
		input_node = "Divide for Sinus Frequency"
		gui_use_preview_patch_size = "1"
		gui_preview_patch_size = "31.25 31.25"
		step_start = "Sinus Start"
		step_end = "Sinus End"
		>
	</smooth_step_scalar>
	<soft_minimum_scalar
		name = "Soft Minimum Sinus Frequency"
		gui_use_node_pos = "1"
		gui_node_pos = "240 100 0"
		gui_group = "Sinus Frequency Function"
		enable = "1"
		input_node = "Soft Maximum Sinus Frequency"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "Soft Clamp Ceiling"
		softness = "Soft Clamp Ceiling Smoothness"
		>
	</soft_minimum_scalar>
	<constant_scalar
		name = "Soft Clamp Floor Smoothness"
		gui_use_node_pos = "1"
		gui_node_pos = "520 980 0"
		gui_group = "Soft Clamp Settings"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		scalar = "0.1"
		>
	</constant_scalar>
	<conditional_scalar
		name = "Use Clamping or Not"
		gui_use_node_pos = "1"
		gui_node_pos = "120 -160 0"
		gui_group = "Clamping Conditions"
		enable = "1"
		input_node = "True (1)"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		condition = "2"
		comparison_value = "Use Clamping? ( 0 = OFF | 1 = ON )"
		if_result = "Use Smooth Step or Soft Clamp"
		else_result = "Divide for Sinus Frequency"
		>
	</conditional_scalar>
	<constant_scalar
		name = "Soft Clamp Floor"
		gui_use_node_pos = "1"
		gui_node_pos = "520 1040 0"
		gui_group = "Soft Clamp Settings"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		scalar = "-1"
		>
	</constant_scalar>
	<constant_scalar
		name = "Sinus Scale Multiplier"
		gui_use_node_pos = "1"
		gui_node_pos = "-40 1040 0"
		gui_group = "Sinus Frequency Settings"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		scalar = "2"
		>
	</constant_scalar>
	<soft_maximum_scalar
		name = "Soft Maximum Sinus Frequency"
		gui_use_node_pos = "1"
		gui_node_pos = "240 160 0"
		gui_group = "Sinus Frequency Function"
		enable = "1"
		input_node = "Divide for Sinus Frequency"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "Soft Clamp Floor"
		softness = "Soft Clamp Floor Smoothness"
		>
	</soft_maximum_scalar>
	<constant_scalar
		name = "Use Clamping? ( 0 = OFF | 1 = ON )"
		gui_use_node_pos = "1"
		gui_node_pos = "-40 920 0"
		gui_group = "Sinus Frequency Settings"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		scalar = "0"
		>
	</constant_scalar>
	<group
		name = "Sinus Frequency Function"
		gui_use_node_pos = "1"
		gui_node_pos = "150 239 0"
		gui_group = "Sinus Frequency"
		gui_node_size = "1060 1000 1"
		gui_node_colour = "0.5 0.5 0.5"
		special_group = "0"
		global_bookmark = "0"
		>
	</group>
	<constant_scalar
		name = "Use Smooth Step or Soft Clamp? ( 0 = Smooth Step | 1 = Soft Clamp )"
		gui_use_node_pos = "1"
		gui_node_pos = "-40 860 0"
		gui_group = "Sinus Frequency Settings"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		scalar = "1"
		>
	</constant_scalar>
	<divide_scalar
		name = "Divide for Sinus Frequency"
		gui_use_node_pos = "1"
		gui_node_pos = "140 240 0"
		gui_group = "Sinus Frequency Function"
		enable = "1"
		input_node = "Arctan Terrain Scalar"
		gui_use_preview_patch_size = "1"
		gui_preview_patch_size = "2000 2000"
		input_2 = "Frequency (-\+)"
		>
	</divide_scalar>
	<subtract_scalar
		name = "Subtract from Terrain Cosine"
		gui_use_node_pos = "1"
		gui_node_pos = "220 420 0"
		gui_group = "Sinus Frequency Function"
		enable = "1"
		input_node = "Multiply Terrain Cosine by Frequency"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "1"
		>
	</subtract_scalar>
	<multiply_scalar
		name = "Multiply Terrain Cosine by Frequency"
		gui_use_node_pos = "1"
		gui_node_pos = "220 540 0"
		gui_group = "Sinus Frequency Function"
		enable = "1"
		input_node = "Terrain Cosine"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "Frequency (-\+)"
		>
	</multiply_scalar>
	<multiply_scalar
		name = "Multiply Terrain Sinus by Frequency"
		gui_use_node_pos = "1"
		gui_node_pos = "40 540 0"
		gui_group = "Sinus Frequency Function"
		enable = "1"
		input_node = "Terrain Sinus"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "Frequency (-\+)"
		>
	</multiply_scalar>
	<divide_scalar
		name = "Divide Terrain Sinus by Cosine"
		gui_use_node_pos = "1"
		gui_node_pos = "140 360 0"
		gui_group = "Sinus Frequency Function"
		enable = "1"
		input_node = "Multiply Terrain Sinus by Frequency"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "Subtract from Terrain Cosine"
		>
	</divide_scalar>
	<multiply_scalar
		name = "Multiply for Sinus Scale"
		gui_use_node_pos = "1"
		gui_node_pos = "120 660 0"
		gui_group = "Sinus Frequency Function"
		enable = "1"
		input_node = "Terrain Scalar Input"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "Sinus Scale Multiplier"
		>
	</multiply_scalar>
	<constant_scalar
		name = "Sinus Start"
		gui_use_node_pos = "1"
		gui_node_pos = "240 1040 0"
		gui_group = "Smooth Step Clamp Settings"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		scalar = "-1"
		>
	</constant_scalar>
	<constant_scalar
		name = "1"
		gui_use_node_pos = "1"
		gui_node_pos = "340 480 0"
		gui_group = "Sinus Frequency Function"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		scalar = "1"
		>
	</constant_scalar>
	<constant_scalar
		name = "Frequency (-\+)"
		gui_use_node_pos = "1"
		gui_node_pos = "-40 980 0"
		gui_group = "Sinus Frequency Settings"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		scalar = "0.825"
		>
	</constant_scalar>
	<sin_scalar
		name = "Terrain Sinus"
		gui_use_node_pos = "1"
		gui_node_pos = "40 600 0"
		gui_group = "Sinus Frequency Function"
		enable = "1"
		input_node = "Multiply for Sinus Scale"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		>
	</sin_scalar>
	<cos_scalar
		name = "Terrain Cosine"
		gui_use_node_pos = "1"
		gui_node_pos = "220 600 0"
		gui_group = "Sinus Frequency Function"
		enable = "1"
		input_node = "Multiply for Sinus Scale"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		>
	</cos_scalar>
	<constant_scalar
		name = "Sinus End"
		gui_use_node_pos = "1"
		gui_node_pos = "240 980 0"
		gui_group = "Smooth Step Clamp Settings"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		scalar = "1"
		>
	</constant_scalar>
	<group
		name = "Clamping Conditions"
		gui_use_node_pos = "1"
		gui_node_pos = "150 -90 0"
		gui_group = "Sinus Frequency Function"
		gui_node_size = "420 260 1"
		gui_node_colour = "0.5 0.5 0.5"
		special_group = "0"
		global_bookmark = "0"
		>
	</group>
	<group
		name = "Smooth Step Clamp Settings"
		gui_use_node_pos = "1"
		gui_node_pos = "240 945 0"
		gui_group = "Sinus Frequency Settings"
		gui_node_size = "240 310 1"
		gui_node_colour = "0.5 0.5 0.5"
		special_group = "0"
		global_bookmark = "0"
		>
	</group>
	<group
		name = "Soft Clamp Settings"
		gui_use_node_pos = "1"
		gui_node_pos = "520 945 0"
		gui_group = "Sinus Frequency Settings"
		gui_node_size = "240 310 1"
		gui_node_colour = "0.5 0.5 0.5"
		special_group = "0"
		global_bookmark = "0"
		>
	</group>
	<group
		name = "Sinus Frequency Settings"
		gui_use_node_pos = "1"
		gui_node_pos = "150 955 0"
		gui_group = "Sinus Frequency"
		gui_node_size = "1060 370 1"
		gui_node_colour = "0.03155000135 0.1701000035 0.4995000064"
		special_group = "0"
		global_bookmark = "1"
		>
	</group>
	<constant_scalar
		name = "True (1)"
		gui_use_node_pos = "1"
		gui_node_pos = "60 -20 0"
		gui_group = "Clamping Conditions"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		scalar = "1"
		>
	</constant_scalar>
	<constant_scalar
		name = "Soft Clamp Ceiling Smoothness"
		gui_use_node_pos = "1"
		gui_node_pos = "520 860 0"
		gui_group = "Soft Clamp Settings"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		scalar = "0.1"
		>
	</constant_scalar>
	<constant_scalar
		name = "Soft Clamp Ceiling"
		gui_use_node_pos = "1"
		gui_node_pos = "520 920 0"
		gui_group = "Soft Clamp Settings"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		scalar = "1"
		>
	</constant_scalar>
	<group
		name = "Sinus Frequency"
		gui_use_node_pos = "1"
		gui_node_pos = "139 420 0"
		gui_group = ""
		gui_node_size = "1280 1600 1"
		gui_node_colour = "0.5 0.5 0.5"
		special_group = "0"
		global_bookmark = "0"
		>
	</group>
	<conditional_scalar
		name = "Use Smooth Step or Soft Clamp"
		gui_use_node_pos = "1"
		gui_node_pos = "220 -100 0"
		gui_group = "Clamping Conditions"
		enable = "1"
		input_node = "True (1)"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		condition = "2"
		comparison_value = "Use Smooth Step or Soft Clamp? ( 0 = Smooth Step | 1 = Soft Clamp )"
		if_result = "Soft Minimum Sinus Frequency"
		else_result = "Smooth Step Sinus Frequency"
		>
	</conditional_scalar>
</terragen_clip>