<terragen_clip>
	<non_node>
		<clip_category type="Terrain" />
		<library_description>Dunes Function originally by wiwine revamped by Jordan Thompson</library_description>
		<library_tag>dunes function revamp</library_tag>
	</non_node>
	<displacement_shader
		name = "Dunes Revamp Function by Jordan Thompson"
		gui_use_node_pos = "1"
		gui_node_pos = "-1060 2860 0"
		gui_group = ""
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "1"
		gui_preview_patch_size = "62.5 62.5"
		function = "Rotate Dunes Function"
		displacement_direction = "1"
		displacement_multiplier = "1"
		>
		<power_fractal_shader_v3
			name = "Dunes Warp SM"
			gui_use_node_pos = "1"
			gui_node_pos = "1440 3240 0"
			gui_group = "Dunes Settings"
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			seed = "52603"
			feature_scale = "30"
			lead-in_scale = "250"
			smallest_scale = "5"
			noise_octaves = "7"
			obey_smoothing_filter = "1"
			noise_stretch_XYZ = "1 1 1"
			apply_high_colour = "1"
			high_colour = "1.5 1.5 1.5"
			apply_low_colour = "1"
			low_colour = "0 0 0"
			colour_contrast = "0.5"
			colour_offset = "0"
			colour_roughness = "0.25"
			clamp_high_colour = "0"
			clamp_low_colour = "0"
			apply_displacement = "0"
			displacement_direction = "1"
			displacement_amplitude = "1"
			displacement_offset = "0"
			displacement_roughness = "1"
			displacement_spike_limit = "1"
			continue_spike_limit = "0"
			adjust_coastline = "0"
			coastline_altitude = "0"
			coastline_smoothing = "30"
			noise_flavour = "0"
			ridge_smoothing = "0.1"
			gully_smoothing = "0.1"
			noise_variation = "0"
			variation_method = "2"
			buoyancy_from_variation = "0"
			clumping_of_variation = "0"
			better_colour_continuity = "1"
			better_displacement_continuity = "0"
			distort_by_normal = "0"
			distortion_by_normal = "5"
			lead-in_warp_effect = "0"
			lead-in_warp_amount = "0.5"
			less_warp_at_feature_scale = "0"
			allow_vertical_warp = "0"
			four-d_noise = "0"
			four-d_noise_speed = "0.1"
			reference_frame_number = "0"
			blend_by_shader = "0"
			blending_shader = ""
			fit_blendshader_to_this = "0"
			invert_blendshader = "0"
			>
		</power_fractal_shader_v3>
		<power_fractal_shader_v3
			name = "Dunes Distribution"
			gui_use_node_pos = "1"
			gui_node_pos = "1440 2520 0"
			gui_group = "Dunes Settings"
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "1"
			gui_preview_patch_size = "250 250"
			seed = "60709"
			feature_scale = "75"
			lead-in_scale = "75"
			smallest_scale = "20"
			noise_octaves = "4"
			obey_smoothing_filter = "1"
			noise_stretch_XYZ = "1 1 1"
			apply_high_colour = "1"
			high_colour = "1 1 1"
			apply_low_colour = "1"
			low_colour = "0 0 0"
			colour_contrast = "0.5"
			colour_offset = "-0.475"
			colour_roughness = "0.35"
			clamp_high_colour = "0"
			clamp_low_colour = "0"
			apply_displacement = "0"
			displacement_direction = "1"
			displacement_amplitude = "1"
			displacement_offset = "0"
			displacement_roughness = "1"
			displacement_spike_limit = "1"
			continue_spike_limit = "0"
			adjust_coastline = "0"
			coastline_altitude = "0"
			coastline_smoothing = "30"
			noise_flavour = "1"
			ridge_smoothing = "0.1"
			gully_smoothing = "1.25"
			noise_variation = "0"
			variation_method = "1"
			buoyancy_from_variation = "0"
			clumping_of_variation = "0"
			better_colour_continuity = "1"
			better_displacement_continuity = "0"
			distort_by_normal = "0"
			distortion_by_normal = "5"
			lead-in_warp_effect = "0"
			lead-in_warp_amount = "0.5"
			less_warp_at_feature_scale = "0"
			allow_vertical_warp = "0"
			four-d_noise = "0"
			four-d_noise_speed = "0.1"
			reference_frame_number = "0"
			blend_by_shader = "0"
			blending_shader = ""
			fit_blendshader_to_this = "0"
			invert_blendshader = "0"
			>
		</power_fractal_shader_v3>
		<z_to_scalar
			name = "Dunes Z to Scalar"
			gui_use_node_pos = "1"
			gui_node_pos = "300 3680 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Get Dunes Position in Texture"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			>
		</z_to_scalar>
		<multiply_scalar
			name = "Multiply DP1 Falloff"
			gui_use_node_pos = "1"
			gui_node_pos = "840 1120 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "2.5"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Dunes Phase Falloff (Divide Scaled Dunes)"
			>
		</multiply_scalar>
		<constant_scalar
			name = "0.25"
			gui_use_node_pos = "1"
			gui_node_pos = "700 2020 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			scalar = "0.25"
			>
		</constant_scalar>
		<transform_input_shader
			name = "DP1 Distribution"
			gui_use_node_pos = "1"
			gui_node_pos = "840 680 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Dunes Distribution"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			use_world_space = "0"
			use_undisplaced_space = "0"
			translate = "1"
			translate_by = "0 0 0"
			rotate = "1"
			rotate_by = "0 45 0"
			scale = "1"
			scale_by = "0.8 0.5 0.5"
			>
		</transform_input_shader>
		<add_scalar
			name = "Add Dunes Modulation LX"
			gui_use_node_pos = "1"
			gui_node_pos = "380 3560 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Dunes Warp SM"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Dunes Warp LX"
			>
		</add_scalar>
		<transform_input_shader
			name = "Rotate Dunes Function"
			gui_use_node_pos = "1"
			gui_node_pos = "640 60 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Use Phased Dunes Effect"
			gui_use_preview_patch_size = "1"
			gui_preview_patch_size = "500 500"
			use_world_space = "0"
			use_undisplaced_space = "0"
			translate = "0"
			translate_by = "0 0 0"
			rotate = "1"
			rotate_by = "0 100 0"
			scale = "0"
			scale_by = "1 1 1"
			>
		</transform_input_shader>
		<constant_scalar
			name = "Dune Edge Ceiling"
			gui_use_node_pos = "1"
			gui_node_pos = "1440 2240 0"
			gui_group = "Dunes Settings"
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			scalar = "0.985"
			>
		</constant_scalar>
		<constant_scalar
			name = "True"
			gui_use_node_pos = "1"
			gui_node_pos = "500 240 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			scalar = "1"
			>
		</constant_scalar>
		<surface_layer
			name = "Mask DP1"
			gui_use_node_pos = "1"
			gui_node_pos = "720 400 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "1"
			gui_preview_patch_size = "250 250"
			apply_colour = "1"
			diffuse_colour = "0.5 0.5 0.5"
			colour_function = ""
			enable_test_colour = "0"
			test_colour = "1 0 1"
			luminous = "0"
			luminosity_multiplier = "1"
			luminosity_tint = "1 1 1"
			luminosity_function = ""
			displacement_direction = "1"
			displacement_multiplier = "1"
			displacement_function = ""
			displacement_offset = "0"
			smoothing_effect = "0"
			smoothing_amount = "1"
			child_layers = "Multiples DP1 by DP1 Distribution"
			coverage = "1"
			fractal_breakup = "0"
			breakup_shader = ""
			fractal_contrast = "0.5"
			invert_breakup = "0"
			only_breakup_colour = "1"
			blend_by_shader = "1"
			blending_shader = "Warp Dunes Mask"
			invert_blendshader = "1"
			blend_as_coverage = "1"
			limit_maximum_altitude = "0"
			maximum_altitude = "1000"
			max_alt_fuzzy_zone = "200"
			limit_minimum_altitude = "0"
			minimum_altitude = "200"
			min_alt_fuzzy_zone = "200"
			altitude_key = "1"
			use_Y_for_altitude = "0"
			limit_maximum_slope = "0"
			maximum_slope_angle = "60"
			max_slope_fuzzy_zone = "20"
			limit_minimum_slope = "0"
			minimum_slope_angle = "30"
			min_slope_fuzzy_zone = "10"
			slope_key = "0"
			use_Y_for_slope = "0"
			intersect_underlying = "0"
			intersection_mode = "0"
			intersection_zone = "2"
			smoothing_scale = "0"
			intersection_shift = "2"
			min_intersection_shift = "-2"
			fuzzy_zone_softness = "1"
			smoother_fuzzy_zones_for_shading = "0"
			smoother_fuzzy_zones_for_displacement = "0"
			>
		</surface_layer>
		<multiply_scalar
			name = "Multiples DP1 by DP1 Distribution"
			gui_use_node_pos = "1"
			gui_node_pos = "720 620 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Warp DP1 Scalar"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "DP1 Distribution"
			>
		</multiply_scalar>
		<conditional_scalar
			name = "Dunes Side Slip Conditional"
			gui_use_node_pos = "1"
			gui_node_pos = "560 3280 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Clamp 0 1 scalar 01"
			gui_use_preview_patch_size = "1"
			gui_preview_patch_size = "31.25 31.25"
			condition = "5"
			comparison_value = "Dunes Lean Modulator"
			if_result = "0"
			else_result = "1"
			>
		</conditional_scalar>
		<subtract_scalar
			name = "Subtract Slip From Lean"
			gui_use_node_pos = "1"
			gui_node_pos = "540 3160 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Dunes Lean Modulator"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Dunes Side Slip Conditional"
			>
		</subtract_scalar>
		<conditional_scalar
			name = "Use Phased Dunes Effect"
			gui_use_node_pos = "1"
			gui_node_pos = "640 160 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "True"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			condition = "2"
			comparison_value = "Phase Dunes Effect ( 1 = ON | 0 = OFF )"
			if_result = "Add Dunes Phase 1"
			else_result = "Multiply Dunes by Distribution"
			>
		</conditional_scalar>
		<constant_scalar
			name = "Phase Dunes Effect ( 1 = ON | 0 = OFF )"
			gui_use_node_pos = "1"
			gui_node_pos = "1440 280 0"
			gui_group = "Dunes Settings"
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			scalar = "0"
			>
		</constant_scalar>
		<divide_scalar
			name = "Divide Dunes Z Scalar"
			gui_use_node_pos = "1"
			gui_node_pos = "300 3620 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Dunes Z to Scalar"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Dunes Scale"
			>
		</divide_scalar>
		<transform_input_shader
			name = "DP1 Scalar"
			gui_use_node_pos = "1"
			gui_node_pos = "720 1260 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Multiply Dunes by Height"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			use_world_space = "0"
			use_undisplaced_space = "0"
			translate = "1"
			translate_by = "0 0 0"
			rotate = "0"
			rotate_by = "0 0 0"
			scale = "1"
			scale_by = "0.5 0.5 0.5"
			>
		</transform_input_shader>
		<constant_scalar
			name = "Dunes Phase Falloff (Divide Scaled Dunes)"
			gui_use_node_pos = "1"
			gui_node_pos = "1440 20 0"
			gui_group = "Dunes Settings"
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			scalar = "1"
			>
		</constant_scalar>
		<add_scalar
			name = "Add Dunes Modulation"
			gui_use_node_pos = "1"
			gui_node_pos = "300 3500 0"
			gui_group = "Dunes Function"
			enable = "0"
			input_node = "Divide Dunes Z Scalar"
			gui_use_preview_patch_size = "1"
			gui_preview_patch_size = "8000 8000"
			input_2 = "Add Dunes Modulation LX"
			>
		</add_scalar>
		<add_scalar
			name = "Add Dunes Phase 1"
			gui_use_node_pos = "1"
			gui_node_pos = "640 320 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Multiply Dunes by Distribution"
			gui_use_preview_patch_size = "1"
			gui_preview_patch_size = "250 250"
			input_2 = "Mask DP1"
			>
		</add_scalar>
		<multiply_scalar
			name = "Dunes Multiply Dunes Gap"
			gui_use_node_pos = "1"
			gui_node_pos = "580 3500 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "1"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Dunes Gap"
			>
		</multiply_scalar>
		<power_fractal_shader_v3
			name = "Dunes Warp LX"
			gui_use_node_pos = "1"
			gui_node_pos = "1440 3000 0"
			gui_group = "Dunes Settings"
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			seed = "42844"
			feature_scale = "400"
			lead-in_scale = "1000"
			smallest_scale = "10"
			noise_octaves = "8"
			obey_smoothing_filter = "1"
			noise_stretch_XYZ = "1 1 1"
			apply_high_colour = "1"
			high_colour = "25 25 25"
			apply_low_colour = "1"
			low_colour = "0 0 0"
			colour_contrast = "0.5"
			colour_offset = "0"
			colour_roughness = "0.25"
			clamp_high_colour = "0"
			clamp_low_colour = "0"
			apply_displacement = "0"
			displacement_direction = "1"
			displacement_amplitude = "1"
			displacement_offset = "0"
			displacement_roughness = "1"
			displacement_spike_limit = "1"
			continue_spike_limit = "0"
			adjust_coastline = "0"
			coastline_altitude = "0"
			coastline_smoothing = "30"
			noise_flavour = "0"
			ridge_smoothing = "0.1"
			gully_smoothing = "0.1"
			noise_variation = "2"
			variation_method = "2"
			buoyancy_from_variation = "0.25"
			clumping_of_variation = "0.25"
			better_colour_continuity = "1"
			better_displacement_continuity = "0"
			distort_by_normal = "0"
			distortion_by_normal = "5"
			lead-in_warp_effect = "0"
			lead-in_warp_amount = "0.5"
			less_warp_at_feature_scale = "0"
			allow_vertical_warp = "0"
			four-d_noise = "0"
			four-d_noise_speed = "0.1"
			reference_frame_number = "0"
			blend_by_shader = "0"
			blending_shader = ""
			fit_blendshader_to_this = "0"
			invert_blendshader = "0"
			>
		</power_fractal_shader_v3>
		<group
			name = "Dunes Settings"
			gui_use_node_pos = "1"
			gui_node_pos = "1619 1740 0"
			gui_group = "Dunes Function Rebuild by Jordan Thompson"
			gui_node_size = "640 4400 1"
			gui_node_colour = "0.4995000064 0.07592999935 0.0545900017"
			special_group = "0"
			global_bookmark = "1"
			>
		</group>
		<group
			name = "Dunes Function"
			gui_use_node_pos = "1"
			gui_node_pos = "610 1740 0"
			gui_group = "Dunes Function Rebuild by Jordan Thompson"
			gui_node_size = "1100 4400 1"
			gui_node_colour = "0.05112000182 0.1360999942 0.4995000064"
			special_group = "0"
			global_bookmark = "0"
			>
		</group>
		<constant_scalar
			name = "Dunes Distribution Pinching"
			gui_use_node_pos = "1"
			gui_node_pos = "1440 560 0"
			gui_group = "Dunes Settings"
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			scalar = "0"
			>
		</constant_scalar>
		<constant_scalar
			name = "Dunes Angle of Repose (Degrees)"
			gui_use_node_pos = "1"
			gui_node_pos = "1440 840 0"
			gui_group = "Dunes Settings"
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			scalar = "45"
			>
		</constant_scalar>
		<constant_scalar
			name = "Dunes Core Hardness"
			gui_use_node_pos = "1"
			gui_node_pos = "1440 1120 0"
			gui_group = "Dunes Settings"
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			scalar = "0.5"
			>
		</constant_scalar>
		<bias_scalar
			name = "Bias Dunes Scalar"
			gui_use_node_pos = "1"
			gui_node_pos = "640 2640 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Divide Dunes Cos by Constant"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			bias = "Dunes Core Hardness"
			>
		</bias_scalar>
		<add_scalar
			name = "Add to PI for Warp Ampltitude"
			gui_use_node_pos = "1"
			gui_node_pos = "920 1600 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "PI"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Dunes Distribution Pinching"
			>
		</add_scalar>
		<divide_scalar
			name = "Divide DP1 Scalar"
			gui_use_node_pos = "1"
			gui_node_pos = "720 1060 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "DP1 Scalar"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Multiply DP1 Falloff"
			>
		</divide_scalar>
		<warp_input_shader
			name = "Warp Distribution by Dunes"
			gui_use_node_pos = "1"
			gui_node_pos = "720 1400 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Dunes Distribution"
			gui_use_preview_patch_size = "1"
			gui_preview_patch_size = "125 125"
			warper = "Dunes Distribution Warper"
			>
		</warp_input_shader>
		<soft_maximum_scalar
			name = "Soft Maximum Dunes Scalar"
			gui_use_node_pos = "1"
			gui_node_pos = "620 1900 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Multiply Dunes by Height"
			gui_use_preview_patch_size = "1"
			gui_preview_patch_size = "250 250"
			input_2 = "0.25"
			softness = "0.125"
			>
		</soft_maximum_scalar>
		<constant_scalar
			name = "0.125"
			gui_use_node_pos = "1"
			gui_node_pos = "760 1960 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			scalar = "0.125"
			>
		</constant_scalar>
		<note
			name = "Doc_ Dunes Phase Falloff"
			gui_use_node_pos = "1"
			gui_node_pos = "1620 -80 0"
			gui_group = "Dunes Settings"
			gui_node_size = "520 130 1"
			gui_note_text = "The value scaled dunes displacement is divided&#xD;&#xA;Value: 1+"
			gui_note_text_colour = "0 0 0"
			gui_note_use_custom_text_size = "1"
			gui_note_custom_text_size = "15"
			gui_node_colour = "0.9900000095 0.9599999785 0.6100000143"
			>
		</note>
		<group
			name = "Dunes Function Rebuild by Jordan Thompson"
			gui_use_node_pos = "1"
			gui_node_pos = "999 1745 0"
			gui_group = ""
			gui_node_size = "2039 4590 1"
			gui_node_colour = "0.5 0.5 0.5"
			special_group = "0"
			global_bookmark = "0"
			>
		</group>
		<multiply_scalar
			name = "Multiply Dunes by Distribution"
			gui_use_node_pos = "1"
			gui_node_pos = "640 1320 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Warp Dunes Scalar"
			gui_use_preview_patch_size = "1"
			gui_preview_patch_size = "500 500"
			input_2 = "Warp Distribution by Dunes"
			>
		</multiply_scalar>
		<multiply_scalar
			name = "Multiply Dunes Warp Map by PI"
			gui_use_node_pos = "1"
			gui_node_pos = "920 1540 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Warp Dunes Scalar"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Add to PI for Warp Ampltitude"
			>
		</multiply_scalar>
		<displacement_shader
			name = "Dunes Distribution Warper"
			gui_use_node_pos = "1"
			gui_node_pos = "820 1480 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			function = "Multiply Dunes Warp Map by PI"
			displacement_direction = "1"
			displacement_multiplier = "1"
			>
		</displacement_shader>
		<constant_scalar
			name = "Dunes Gap"
			gui_use_node_pos = "1"
			gui_node_pos = "1440 3660 0"
			gui_group = "Dunes Settings"
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			scalar = "1"
			>
		</constant_scalar>
		<multiply_scalar
			name = "Multiply Dunes by Height"
			gui_use_node_pos = "1"
			gui_node_pos = "620 2080 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Soft minimum scalar 02"
			gui_use_preview_patch_size = "1"
			gui_preview_patch_size = "125 125"
			input_2 = "Divide Dunes Height by PI"
			>
		</multiply_scalar>
		<subtract_scalar
			name = "Subtract Dunes Sip"
			gui_use_node_pos = "1"
			gui_node_pos = "440 3220 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Clamp 0 1 scalar 01"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Dunes Side Slip Conditional"
			>
		</subtract_scalar>
		<clamp_0_1_scalar
			name = "Clamp 0 1 scalar 01"
			gui_use_node_pos = "1"
			gui_node_pos = "440 3360 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Dunes Modular Scalar"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			>
		</clamp_0_1_scalar>
		<modulo_scalar
			name = "Dunes Modular Scalar"
			gui_use_node_pos = "1"
			gui_node_pos = "440 3440 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Add Dunes Modulation"
			gui_use_preview_patch_size = "1"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Dunes Multiply Dunes Gap"
			>
		</modulo_scalar>
		<subtract_scalar
			name = "Subtract Dunes Cos from Constant"
			gui_use_node_pos = "1"
			gui_node_pos = "440 2840 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "1"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Dunes Cos Scalar"
			>
		</subtract_scalar>
		<cos_scalar
			name = "Dunes Cos Scalar"
			gui_use_node_pos = "1"
			gui_node_pos = "540 2900 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Divide Dunes by Peak Tightness"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			>
		</cos_scalar>
		<divide_scalar
			name = "Divide Dunes by Peak Tightness"
			gui_use_node_pos = "1"
			gui_node_pos = "540 2960 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Multiply Dunes by PI"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Add Peak Tightness"
			>
		</divide_scalar>
		<multiply_scalar
			name = "Multiply Dunes by PI"
			gui_use_node_pos = "1"
			gui_node_pos = "540 3020 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Divide Dunes Slip"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "PI"
			>
		</multiply_scalar>
		<divide_scalar
			name = "Divide Dunes Slip"
			gui_use_node_pos = "1"
			gui_node_pos = "440 3100 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Subtract Dunes Sip"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Subtract Slip From Lean"
			>
		</divide_scalar>
		<power_fractal_shader_v3
			name = "Dunes Height Modulator (High \ Low Colours)"
			gui_use_node_pos = "1"
			gui_node_pos = "1440 3460 0"
			gui_group = "Dunes Settings"
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "1"
			gui_preview_patch_size = "125 125"
			seed = "17168"
			feature_scale = "20"
			lead-in_scale = "200"
			smallest_scale = "5"
			noise_octaves = "7"
			obey_smoothing_filter = "1"
			noise_stretch_XYZ = "1 1 1"
			apply_high_colour = "1"
			high_colour = "60 60 60"
			apply_low_colour = "1"
			low_colour = "40 40 40"
			colour_contrast = "0.5"
			colour_offset = "0"
			colour_roughness = "0.25"
			clamp_high_colour = "0"
			clamp_low_colour = "0"
			apply_displacement = "0"
			displacement_direction = "1"
			displacement_amplitude = "1"
			displacement_offset = "0"
			displacement_roughness = "1"
			displacement_spike_limit = "1"
			continue_spike_limit = "0"
			adjust_coastline = "0"
			coastline_altitude = "0"
			coastline_smoothing = "30"
			noise_flavour = "0"
			ridge_smoothing = "0.1"
			gully_smoothing = "0.1"
			noise_variation = "1"
			variation_method = "2"
			buoyancy_from_variation = "0.25"
			clumping_of_variation = "0.25"
			better_colour_continuity = "1"
			better_displacement_continuity = "0"
			distort_by_normal = "0"
			distortion_by_normal = "5"
			lead-in_warp_effect = "0"
			lead-in_warp_amount = "0.5"
			less_warp_at_feature_scale = "0"
			allow_vertical_warp = "0"
			four-d_noise = "0"
			four-d_noise_speed = "0.1"
			reference_frame_number = "0"
			blend_by_shader = "0"
			blending_shader = ""
			fit_blendshader_to_this = "0"
			invert_blendshader = "0"
			>
		</power_fractal_shader_v3>
		<constant_scalar
			name = "Dunes Scale"
			gui_use_node_pos = "1"
			gui_node_pos = "1440 3860 0"
			gui_group = "Dunes Settings"
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			scalar = "30"
			>
		</constant_scalar>
		<constant_scalar
			name = "Dunes Lean Modulator"
			gui_use_node_pos = "1"
			gui_node_pos = "1440 1400 0"
			gui_group = "Dunes Settings"
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			scalar = "0.7"
			>
		</constant_scalar>
		<get_position_in_texture
			name = "Get Dunes Position in Texture"
			gui_use_node_pos = "1"
			gui_node_pos = "300 3740 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			>
		</get_position_in_texture>
		<constant_scalar
			name = "Dunes Slopes Tightness"
			gui_use_node_pos = "1"
			gui_node_pos = "1440 1680 0"
			gui_group = "Dunes Settings"
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			scalar = "0.85"
			>
		</constant_scalar>
		<colour_adjust_shader
			name = "Dunes Mask"
			gui_use_node_pos = "1"
			gui_node_pos = "840 560 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Soft minimum scalar 02"
			gui_use_preview_patch_size = "1"
			gui_preview_patch_size = "62.5 62.5"
			black_point = "0 0 0"
			black_point_adjust = "0"
			white_point = "0.07500000298 0.07500000298 0.07500000298"
			white_point_adjust = "0.07500000298"
			gamma = "1 1 1"
			gamma_adjust = "1"
			clamp_below_black = "0"
			clamp_above_white = "0"
			>
		</colour_adjust_shader>
		<divide_scalar
			name = "Divide Dunes Height by PI"
			gui_use_node_pos = "1"
			gui_node_pos = "700 2140 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Multiply Dunes Height by Constant"
			gui_use_preview_patch_size = "1"
			gui_preview_patch_size = "8000 8000"
			input_2 = "PI"
			>
		</divide_scalar>
		<subtract_scalar
			name = "Subtract Lean from Constant"
			gui_use_node_pos = "1"
			gui_node_pos = "700 2500 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "1"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Dunes Lean Modulator"
			>
		</subtract_scalar>
		<divide_scalar
			name = "Divide Dunes Cos by Constant"
			gui_use_node_pos = "1"
			gui_node_pos = "640 2720 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Multiply Constant by Peak Tightness"
			gui_use_preview_patch_size = "1"
			gui_preview_patch_size = "500 500"
			input_2 = "2"
			>
		</divide_scalar>
		<multiply_scalar
			name = "Multiply Dunes Height by Constant"
			gui_use_node_pos = "1"
			gui_node_pos = "700 2200 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Mutliply Repose Height by Dunes Height"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "2"
			>
		</multiply_scalar>
		<multiply_scalar
			name = "Mutliply Repose Height by Dunes Height"
			gui_use_node_pos = "1"
			gui_node_pos = "700 2260 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Multiply Modulated Constat by Repose"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Dunes Height Modulator (High \ Low Colours)"
			>
		</multiply_scalar>
		<multiply_scalar
			name = "Multiply Modulated Constat by Repose"
			gui_use_node_pos = "1"
			gui_node_pos = "700 2320 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Subtract Lean from Constant"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Tan Repose Radians"
			>
		</multiply_scalar>
		<tan_scalar
			name = "Tan Repose Radians"
			gui_use_node_pos = "1"
			gui_node_pos = "800 2380 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Dunes Repose to Radians"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			>
		</tan_scalar>
		<degrees_to_radians_scalar
			name = "Dunes Repose to Radians"
			gui_use_node_pos = "1"
			gui_node_pos = "800 2440 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Dunes Angle of Repose (Degrees)"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			>
		</degrees_to_radians_scalar>
		<PI_scalar
			name = "PI"
			gui_use_node_pos = "1"
			gui_node_pos = "800 3620 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			>
		</PI_scalar>
		<constant_scalar
			name = "2"
			gui_use_node_pos = "1"
			gui_node_pos = "800 3660 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			scalar = "2"
			>
		</constant_scalar>
		<constant_scalar
			name = "1"
			gui_use_node_pos = "1"
			gui_node_pos = "800 3700 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			scalar = "1"
			>
		</constant_scalar>
		<constant_scalar
			name = "0"
			gui_use_node_pos = "1"
			gui_node_pos = "800 3740 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			scalar = "0"
			>
		</constant_scalar>
		<multiply_scalar
			name = "Multiply Constant by Peak Tightness"
			gui_use_node_pos = "1"
			gui_node_pos = "540 2780 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Subtract Dunes Cos from Constant"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Add Peak Tightness"
			>
		</multiply_scalar>
		<add_scalar
			name = "Add Peak Tightness"
			gui_use_node_pos = "1"
			gui_node_pos = "740 3100 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "1"
			gui_use_preview_patch_size = "1"
			gui_preview_patch_size = "31.25 31.25"
			input_2 = "Multiply Dunes Slip by Peak Tightness"
			>
		</add_scalar>
		<multiply_scalar
			name = "Multiply Dunes Slip by Peak Tightness"
			gui_use_node_pos = "1"
			gui_node_pos = "740 3160 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Dunes Side Slip Conditional"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Dunes Slopes Tightness"
			>
		</multiply_scalar>
		<soft_minimum_scalar
			name = "Soft minimum scalar 02"
			gui_use_node_pos = "1"
			gui_node_pos = "640 2560 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Bias Dunes Scalar"
			gui_use_preview_patch_size = "1"
			gui_preview_patch_size = "125 125"
			input_2 = "Dune Edge Ceiling"
			softness = "Dune Peak Edge Softness"
			>
		</soft_minimum_scalar>
		<warp_input_shader
			name = "Warp Dunes Mask"
			gui_use_node_pos = "1"
			gui_node_pos = "840 480 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Dunes Mask"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			warper = "Dunes Warper"
			>
		</warp_input_shader>
		<note
			name = "Doc_ Dunes Edge Ceiling"
			gui_use_node_pos = "1"
			gui_node_pos = "1620 2100 0"
			gui_group = "Dunes Settings"
			gui_node_size = "520 130 1"
			gui_note_text = "Clamps the maximum height of the dunes coupled with the following Dune Peak Edge Sharpness setting"
			gui_note_text_colour = "0 0 0"
			gui_note_use_custom_text_size = "1"
			gui_note_custom_text_size = "15"
			gui_node_colour = "0.9900000095 0.9599999785 0.6100000143"
			>
		</note>
		<constant_scalar
			name = "Dune Peak Edge Softness"
			gui_use_node_pos = "1"
			gui_node_pos = "1440 1960 0"
			gui_group = "Dunes Settings"
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			scalar = "0.0125"
			>
		</constant_scalar>
		<note
			name = "Doc_ Dunes Scale"
			gui_use_node_pos = "1"
			gui_node_pos = "1620 3760 0"
			gui_group = "Dunes Settings"
			gui_node_size = "520 80 1"
			gui_note_text = "The scale of the dune waves"
			gui_note_text_colour = "0 0 0"
			gui_note_use_custom_text_size = "1"
			gui_note_custom_text_size = "15"
			gui_node_colour = "0.9900000095 0.9599999785 0.6100000143"
			>
		</note>
		<note
			name = "Doc_ Dunes Gap"
			gui_use_node_pos = "1"
			gui_node_pos = "1620 3560 0"
			gui_group = "Dunes Settings"
			gui_node_size = "520 80 1"
			gui_note_text = "The gap between dune waves"
			gui_note_text_colour = "0 0 0"
			gui_note_use_custom_text_size = "1"
			gui_note_custom_text_size = "15"
			gui_node_colour = "0.9900000095 0.9599999785 0.6100000143"
			>
		</note>
		<note
			name = "Doc_ Dunes Height"
			gui_use_node_pos = "1"
			gui_node_pos = "1620 3360 0"
			gui_group = "Dunes Settings"
			gui_node_size = "520 90 1"
			gui_note_text = "Dunes height displacement amplitude"
			gui_note_text_colour = "0 0 0"
			gui_note_use_custom_text_size = "1"
			gui_note_custom_text_size = "15"
			gui_node_colour = "0.9900000095 0.9599999785 0.6100000143"
			>
		</note>
		<note
			name = "Doc_ Dunes Warp SM"
			gui_use_node_pos = "1"
			gui_node_pos = "1620 3120 0"
			gui_group = "Dunes Settings"
			gui_node_size = "520 100 1"
			gui_note_text = "Individual dune warping map"
			gui_note_text_colour = "0 0 0"
			gui_note_use_custom_text_size = "1"
			gui_note_custom_text_size = "15"
			gui_node_colour = "0.9900000095 0.9599999785 0.6100000143"
			>
		</note>
		<note
			name = "Doc_ Dunes Warp XL"
			gui_use_node_pos = "1"
			gui_node_pos = "1620 2900 0"
			gui_group = "Dunes Settings"
			gui_node_size = "520 100 1"
			gui_note_text = "Warp map that should effect a large area dunes to simualate wind direction, and intensity over terrain."
			gui_note_text_colour = "0 0 0"
			gui_note_use_custom_text_size = "1"
			gui_note_custom_text_size = "15"
			gui_node_colour = "0.9900000095 0.9599999785 0.6100000143"
			>
		</note>
		<note
			name = "Doc_ Dunes Distribution"
			gui_use_node_pos = "1"
			gui_node_pos = "1620 2380 0"
			gui_group = "Dunes Settings"
			gui_node_size = "520 130 1"
			gui_note_text = "Dunes distribution masking (breakup the appearance of dune ribbons)"
			gui_note_text_colour = "0 0 0"
			gui_note_use_custom_text_size = "1"
			gui_note_custom_text_size = "15"
			gui_node_colour = "0.9900000095 0.9599999785 0.6100000143"
			>
		</note>
		<note
			name = "Doc_ Dunes Peak Edge Softness"
			gui_use_node_pos = "1"
			gui_node_pos = "1620 1840 0"
			gui_group = "Dunes Settings"
			gui_node_size = "520 130 1"
			gui_note_text = "The softness of the dunes peak &#xD;&#xA;Range: 0 - 1+ "
			gui_note_text_colour = "0 0 0"
			gui_note_use_custom_text_size = "1"
			gui_note_custom_text_size = "15"
			gui_node_colour = "0.9900000095 0.9599999785 0.6100000143"
			>
		</note>
		<note
			name = "Doc_ Dunes Slope Tightness"
			gui_use_node_pos = "1"
			gui_node_pos = "1620 1560 0"
			gui_group = "Dunes Settings"
			gui_node_size = "520 130 1"
			gui_note_text = "The tightness, or steepness of the dune slopes&#xD;&#xA;Range: 0 - 1"
			gui_note_text_colour = "0 0 0"
			gui_note_use_custom_text_size = "1"
			gui_note_custom_text_size = "15"
			gui_node_colour = "0.9900000095 0.9599999785 0.6100000143"
			>
		</note>
		<note
			name = "Doc_ Dunes Lean Modulator"
			gui_use_node_pos = "1"
			gui_node_pos = "1620 1280 0"
			gui_group = "Dunes Settings"
			gui_node_size = "520 130 1"
			gui_note_text = "The lean direction intensity&#xD;&#xA;Range: 0 - 1"
			gui_note_text_colour = "0 0 0"
			gui_note_use_custom_text_size = "1"
			gui_note_custom_text_size = "15"
			gui_node_colour = "0.9900000095 0.9599999785 0.6100000143"
			>
		</note>
		<note
			name = "Doc_ Dunes Core Hardness"
			gui_use_node_pos = "1"
			gui_node_pos = "1620 1000 0"
			gui_group = "Dunes Settings"
			gui_node_size = "520 130 1"
			gui_note_text = "Dune core bias simulates the core density of a dune. A harder core has sand pile up atop it. &#xD;&#xA;Range: 0 - 1"
			gui_note_text_colour = "0 0 0"
			gui_note_use_custom_text_size = "1"
			gui_note_custom_text_size = "15"
			gui_node_colour = "0.9900000095 0.9599999785 0.6100000143"
			>
		</note>
		<note
			name = "Doc_ Dunes Angle of Repose"
			gui_use_node_pos = "1"
			gui_node_pos = "1620 720 0"
			gui_group = "Dunes Settings"
			gui_node_size = "520 130 1"
			gui_note_text = "The slip angle, or angle of repose of the sand dunes&#xD;&#xA;Value Input: Degrees&#xD;&#xA;Real World Value: 45"
			gui_note_text_colour = "0 0 0"
			gui_note_use_custom_text_size = "1"
			gui_note_custom_text_size = "15"
			gui_node_colour = "0.9900000095 0.9599999785 0.6100000143"
			>
		</note>
		<note
			name = "Doc_ Dunes Distribution Pinching"
			gui_use_node_pos = "1"
			gui_node_pos = "1620 440 0"
			gui_group = "Dunes Settings"
			gui_node_size = "520 130 1"
			gui_note_text = "Using the dunes as displacement, this causes a pinching effect to the distritbution map. At small amounts this can help conform the distribution map to the dunes.&#xD;&#xA;Value Input: Exponential"
			gui_note_text_colour = "0 0 0"
			gui_note_use_custom_text_size = "1"
			gui_note_custom_text_size = "15"
			gui_node_colour = "0.9900000095 0.9599999785 0.6100000143"
			>
		</note>
		<note
			name = "Doc_ Phase Dunes Effect"
			gui_use_node_pos = "1"
			gui_node_pos = "1620 180 0"
			gui_group = "Dunes Settings"
			gui_node_size = "520 130 1"
			gui_note_text = "This add scaled down, and softened dunes between the larger dunes, simulating slip avalanche remnants.&#xD;&#xA;1 = ON&#xD;&#xA;0 = OFF"
			gui_note_text_colour = "0 0 0"
			gui_note_use_custom_text_size = "1"
			gui_note_custom_text_size = "15"
			gui_node_colour = "0.9900000095 0.9599999785 0.6100000143"
			>
		</note>
		<constant_scalar
			name = "2.5"
			gui_use_node_pos = "1"
			gui_node_pos = "840 1200 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			scalar = "1"
			>
		</constant_scalar>
		<constant_scalar
			name = "Dune Warp Intensity"
			gui_use_node_pos = "1"
			gui_node_pos = "1440 2780 0"
			gui_group = "Dunes Settings"
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			scalar = "30"
			>
		</constant_scalar>
		<warp_input_shader
			name = "Warp Dunes Scalar"
			gui_use_node_pos = "1"
			gui_node_pos = "620 1660 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Soft Maximum Dunes Scalar"
			gui_use_preview_patch_size = "1"
			gui_preview_patch_size = "250 250"
			warper = "Dunes Warper"
			>
		</warp_input_shader>
		<vector_displacement_shader
			name = "Dunes Warper"
			gui_use_node_pos = "1"
			gui_node_pos = "740 1740 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			vector_function = "Multiply Dune Warp Scalar"
			x_function_multiplier = "0"
			y_function_multiplier = "0"
			z_function_multiplier = "1"
			reverse_function = "0"
			x_offset = "0"
			y_offset = "0"
			z_offset = "0"
			reverse_offset = "0"
			final_multiplier = "1"
			>
		</vector_displacement_shader>
		<multiply_scalar
			name = "Multiply Dune Warp Scalar"
			gui_use_node_pos = "1"
			gui_node_pos = "840 1820 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Add Dunes Modulation LX"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Dune Warp Intensity"
			>
		</multiply_scalar>
		<note
			name = "Doc_ Dunes Warp Intensity"
			gui_use_node_pos = "1"
			gui_node_pos = "1620 2660 0"
			gui_group = "Dunes Settings"
			gui_node_size = "520 100 1"
			gui_note_text = "The intensity of the warp maps applied to the dunes"
			gui_note_text_colour = "0 0 0"
			gui_note_use_custom_text_size = "1"
			gui_note_custom_text_size = "15"
			gui_node_colour = "0.9900000095 0.9599999785 0.6100000143"
			>
		</note>
		<warp_input_shader
			name = "Warp DP1 Scalar"
			gui_use_node_pos = "1"
			gui_node_pos = "720 760 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Divide DP1 Scalar"
			gui_use_preview_patch_size = "1"
			gui_preview_patch_size = "62.5 62.5"
			warper = "DP1 Warper"
			>
		</warp_input_shader>
		<merge_shader
			name = "Merge SM Warp Map"
			gui_use_node_pos = "1"
			gui_node_pos = "920 920 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Multiply Dune Warp Scalar"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			shader_A = "Scale SM Warp Map"
			mix_to_A = "1"
			mix_controller = ""
			choose_by_altitude = "0"
			texture_space = "1"
			merge_colour = "1"
			colour_merge_mode = "1"
			merge_displacement = "0"
			displace_merge_mode = "0"
			>
		</merge_shader>
		<transform_input_shader
			name = "Scale SM Warp Map"
			gui_use_node_pos = "1"
			gui_node_pos = "980 1000 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = "Dunes Warp SM"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			use_world_space = "0"
			use_undisplaced_space = "0"
			translate = "0"
			translate_by = "0 0 0"
			rotate = "0"
			rotate_by = "0 0 0"
			scale = "1"
			scale_by = "0.325 0.325 0.325"
			>
		</transform_input_shader>
		<vector_displacement_shader
			name = "DP1 Warper"
			gui_use_node_pos = "1"
			gui_node_pos = "840 840 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			vector_function = "Merge SM Warp Map"
			x_function_multiplier = "0"
			y_function_multiplier = "0"
			z_function_multiplier = "1"
			reverse_function = "0"
			x_offset = "0"
			y_offset = "0"
			z_offset = "0"
			reverse_offset = "0"
			final_multiplier = "1"
			>
		</vector_displacement_shader>
		<constant_scalar
			name = "Constant scalar 02"
			gui_use_node_pos = "1"
			gui_node_pos = "760 3280 0"
			gui_group = "Dunes Function"
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			scalar = "0"
			>
		</constant_scalar>
	</displacement_shader>
</terragen_clip>