<terragen_clip>
	<non_node>
		<clip_category type="Shaders" />
		<library_description>This node superimposes a square grid on a surface - useful for object placement and scene creation.</library_description>
		<library_tag>square grid</library_tag>
		<library_connection_tips>Connect the output of your Compute Terrain node to the Main Input, and the Grid Output as a child layer to your top surface layer.&#xD;&#xA;&#xD;&#xA;Step Size, Grid Center and Line Width (%) are controlled via the node's internal network.</library_connection_tips>
	</non_node>
	<surface_layer
		name = "Square Grid"
		gui_use_node_pos = "1"
		gui_node_pos = "-1660 3300 0"
		gui_group = "Shaders"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		apply_colour = "1"
		diffuse_colour = "1 1 0"
		colour_function = ""
		enable_test_colour = "0"
		test_colour = "1 0 1"
		luminous = "0"
		luminosity_multiplier = "1"
		luminosity_tint = "1 1 1"
		luminosity_function = ""
		displacement_direction = "1"
		displacement_multiplier = "1"
		displacement_function = ""
		displacement_offset = "0"
		smoothing_effect = "0"
		smoothing_amount = "1"
		child_layers = ""
		coverage = "0.5"
		fractal_breakup = "1"
		breakup_shader = "Grid Breakup"
		fractal_contrast = "1"
		invert_breakup = "0"
		only_breakup_colour = "1"
		blend_by_shader = "0"
		blending_shader = ""
		invert_blendshader = "0"
		blend_as_coverage = "1"
		limit_maximum_altitude = "0"
		maximum_altitude = "1000"
		max_alt_fuzzy_zone = "200"
		limit_minimum_altitude = "0"
		minimum_altitude = "200"
		min_alt_fuzzy_zone = "200"
		altitude_key = "1"
		use_Y_for_altitude = "0"
		limit_maximum_slope = "0"
		maximum_slope_angle = "60"
		max_slope_fuzzy_zone = "20"
		limit_minimum_slope = "0"
		minimum_slope_angle = "30"
		min_slope_fuzzy_zone = "10"
		slope_key = "0"
		use_Y_for_slope = "0"
		intersect_underlying = "0"
		intersection_mode = "0"
		intersection_zone = "2"
		smoothing_scale = "0"
		intersection_shift = "2"
		min_intersection_shift = "-2"
		fuzzy_zone_softness = "1"
		smoother_fuzzy_zones_for_shading = "0"
		smoother_fuzzy_zones_for_displacement = "0"
		>
		<subtract_vector
			name = "Subtract Position_1"
			gui_use_node_pos = "1"
			gui_node_pos = "-180 0 0"
			gui_group = ""
			enable = "1"
			input_node = "Grid Center"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Get Grid Position_1"
			>
		</subtract_vector>
		<add_scalar
			name = "Add Lines_1"
			gui_use_node_pos = "1"
			gui_node_pos = "-180 0 0"
			gui_group = ""
			enable = "1"
			input_node = "X Lines_1"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Z Lines_1"
			>
		</add_scalar>
		<constant_vector
			name = "Grid Center"
			gui_use_node_pos = "1"
			gui_node_pos = "-240 80 0"
			gui_group = ""
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			vector = "0 0 0"
			>
		</constant_vector>
		<add_scalar
			name = "X Line Offset_1"
			gui_use_node_pos = "1"
			gui_node_pos = "-180 0 0"
			gui_group = ""
			enable = "1"
			input_node = "GridX to Scalar_1"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Multiply by .5_1"
			>
		</add_scalar>
		<modulo_scalar
			name = "Modulo Z_1"
			gui_use_node_pos = "1"
			gui_node_pos = "0 0 0"
			gui_group = ""
			enable = "1"
			input_node = "Z Line Offset_1"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Step Size"
			>
		</modulo_scalar>
		<step_scalar
			name = "Z Lines_1"
			gui_use_node_pos = "1"
			gui_node_pos = "0 0 0"
			gui_group = ""
			enable = "1"
			input_node = "Get % Z_1"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Multiply by .01_1"
			>
		</step_scalar>
		<divide_scalar
			name = "Get % Z_1"
			gui_use_node_pos = "1"
			gui_node_pos = "0 0 0"
			gui_group = ""
			enable = "1"
			input_node = "Abs Z_1"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Step Size"
			>
		</divide_scalar>
		<divide_scalar
			name = "Get % X_1"
			gui_use_node_pos = "1"
			gui_node_pos = "-180 0 0"
			gui_group = ""
			enable = "1"
			input_node = "Abs X_1"
			gui_use_preview_patch_size = "1"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Step Size"
			>
		</divide_scalar>
		<step_scalar
			name = "Grid Fractal"
			gui_use_node_pos = "1"
			gui_node_pos = "-80 -120 0"
			gui_group = ""
			enable = "1"
			input_node = "Add Lines_1"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "One_1"
			>
		</step_scalar>
		<multiply_scalar
			name = "Multiply by .5_1"
			gui_use_node_pos = "1"
			gui_node_pos = "0 0 0"
			gui_group = ""
			enable = "1"
			input_node = ".5_1"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Physical Line Width_1"
			>
		</multiply_scalar>
		<add_scalar
			name = "Z Line Offset_1"
			gui_use_node_pos = "1"
			gui_node_pos = "-180 0 0"
			gui_group = ""
			enable = "1"
			input_node = "Multiply by .5_1"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "GridZ to Scalar_1"
			>
		</add_scalar>
		<multiply_scalar
			name = "Physical Line Width_1"
			gui_use_node_pos = "1"
			gui_node_pos = "0 0 0"
			gui_group = ""
			enable = "1"
			input_node = "Multiply by .01_1"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Step Size"
			>
		</multiply_scalar>
		<modulo_scalar
			name = "Modulo X_1"
			gui_use_node_pos = "1"
			gui_node_pos = "-180 0 0"
			gui_group = ""
			enable = "1"
			input_node = "X Line Offset_1"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Step Size"
			>
		</modulo_scalar>
		<step_scalar
			name = "X Lines_1"
			gui_use_node_pos = "1"
			gui_node_pos = "-180 0 0"
			gui_group = ""
			enable = "1"
			input_node = "Get % X_1"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Multiply by .01_1"
			>
		</step_scalar>
		<multiply_scalar
			name = "Multiply by .01_1"
			gui_use_node_pos = "1"
			gui_node_pos = "0 0 0"
			gui_group = ""
			enable = "1"
			input_node = "Line Width (%)"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = ".01_1"
			>
		</multiply_scalar>
		<constant_scalar
			name = "Step Size"
			gui_use_node_pos = "1"
			gui_node_pos = "-20 80 0"
			gui_group = ""
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			scalar = "10"
			>
		</constant_scalar>
		<constant_scalar
			name = "One_1"
			gui_use_node_pos = "1"
			gui_node_pos = "0 0 0"
			gui_group = ""
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			scalar = "0"
			>
		</constant_scalar>
		<abs_scalar
			name = "Abs Z_1"
			gui_use_node_pos = "1"
			gui_node_pos = "0 0 0"
			gui_group = ""
			enable = "1"
			input_node = "Modulo Z_1"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			>
		</abs_scalar>
		<abs_scalar
			name = "Abs X_1"
			gui_use_node_pos = "1"
			gui_node_pos = "-180 0 0"
			gui_group = ""
			enable = "1"
			input_node = "Modulo X_1"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			>
		</abs_scalar>
		<z_to_scalar
			name = "GridZ to Scalar_1"
			gui_use_node_pos = "1"
			gui_node_pos = "-180 0 0"
			gui_group = ""
			enable = "1"
			input_node = "Subtract Position_1"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			>
		</z_to_scalar>
		<constant_scalar
			name = ".5_1"
			gui_use_node_pos = "1"
			gui_node_pos = "0 0 0"
			gui_group = ""
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			scalar = "0.5"
			>
		</constant_scalar>
		<x_to_scalar
			name = "GridX to Scalar_1"
			gui_use_node_pos = "1"
			gui_node_pos = "-180 0 0"
			gui_group = ""
			enable = "1"
			input_node = "Subtract Position_1"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			>
		</x_to_scalar>
		<get_position
			name = "Get Grid Position_1"
			gui_use_node_pos = "1"
			gui_node_pos = "-180 0 0"
			gui_group = ""
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			>
		</get_position>
		<constant_scalar
			name = ".01_1"
			gui_use_node_pos = "1"
			gui_node_pos = "0 0 0"
			gui_group = ""
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			scalar = "0.01"
			>
		</constant_scalar>
		<constant_scalar
			name = "Line Width (%)"
			gui_use_node_pos = "1"
			gui_node_pos = "160 80 0"
			gui_group = ""
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			scalar = "3"
			>
		</constant_scalar>
		<difference_scalar
			name = "Grid Breakup"
			gui_use_node_pos = "1"
			gui_node_pos = "0 -320 0"
			gui_group = ""
			enable = "1"
			input_node = "Grid Fractal"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Output Inversion"
			>
		</difference_scalar>
		<constant_scalar
			name = "Output Inversion"
			gui_use_node_pos = "1"
			gui_node_pos = "100 -120 0"
			gui_group = ""
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			scalar = "1"
			>
		</constant_scalar>
	</surface_layer>
	<note
		name = "Square Grid Notes"
		gui_use_node_pos = "1"
		gui_node_pos = "-1620 3160 0"
		gui_group = ""
		gui_node_size = "360 220 1"
		gui_note_text = "This node superimposes a square grid on a surface - useful for object placement and scene creation.&#xD;&#xA;&#xD;&#xA;Connect the output of your Compute Terrain node to the Main Input, and the Grid Output as a child layer to your top surface layer.&#xD;&#xA;&#xD;&#xA;Step Size, Grid Center and Line Width (%) are controlled via the node's internal network."
		gui_note_text_colour = "0 0 0"
		gui_note_use_custom_text_size = "0"
		gui_note_custom_text_size = "10"
		gui_node_colour = "0.9900000095 0.9599999785 0.6100000143"
		>
	</note>
</terragen_clip>