<terragen_clip>
	<arcsin_scalar
		name = "Arcsin scalar 01"
		gui_use_node_pos = "1"
		gui_node_pos = "-720 1160 0"
		gui_group = "Group 01"
		enable = "1"
		input_node = "Cos scalar 03"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		>
	</arcsin_scalar>
	<cos_scalar
		name = "Cos scalar 03"
		gui_use_node_pos = "1"
		gui_node_pos = "-720 1200 0"
		gui_group = "Group 01"
		enable = "1"
		input_node = "Clamp 0 1 scalar 01"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		>
	</cos_scalar>
	<clamp_0_1_scalar
		name = "Clamp 0 1 scalar 01"
		gui_use_node_pos = "1"
		gui_node_pos = "-720 1240 0"
		gui_group = "Group 01"
		enable = "1"
		input_node = "Divide scalar 03"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		>
	</clamp_0_1_scalar>
	<divide_scalar
		name = "Divide scalar 03"
		gui_use_node_pos = "1"
		gui_node_pos = "-720 1280 0"
		gui_group = "Group 01"
		enable = "1"
		input_node = "Mix scalar 01"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "Constant (500"
		>
	</divide_scalar>
	<constant_scalar
		name = "Constant (500"
		gui_use_node_pos = "1"
		gui_node_pos = "-540 1320 0"
		gui_group = "Group 01"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		scalar = "500"
		>
	</constant_scalar>
	<subtract_scalar
		name = "Subtract scalar 01"
		gui_use_node_pos = "1"
		gui_node_pos = "-360 1620 0"
		gui_group = "Group 01"
		enable = "1"
		input_node = "Divide scalar 02"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "Floor scalar 01"
		>
	</subtract_scalar>
	<smooth_step_scalar
		name = "Smooth step scalar 01"
		gui_use_node_pos = "1"
		gui_node_pos = "-360 1420 0"
		gui_group = "Group 01"
		enable = "1"
		input_node = "Subtract scalar 01"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		step_start = ""
		step_end = ""
		>
	</smooth_step_scalar>
	<add_scalar
		name = "Add scalar 05"
		gui_use_node_pos = "1"
		gui_node_pos = "-720 1380 0"
		gui_group = "Group 01"
		enable = "1"
		input_node = "Add scalar 03"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "LargeScale = 100 m"
		>
	</add_scalar>
	<mix_scalar
		name = "Mix scalar 01"
		gui_use_node_pos = "1"
		gui_node_pos = "-720 1320 0"
		gui_group = "Group 01"
		enable = "1"
		input_node = "Add scalar 04"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "Add scalar 05"
		mix_controller = "Smooth step scalar 01"
		>
	</mix_scalar>
	<add_scalar
		name = "Add scalar 04"
		gui_use_node_pos = "1"
		gui_node_pos = "-540 1420 0"
		gui_group = "Group 01"
		enable = "1"
		input_node = "Multiply scalar 04"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "Multiply scalar 02"
		>
	</add_scalar>
	<add_scalar
		name = "Add scalar 03"
		gui_use_node_pos = "1"
		gui_node_pos = "-720 1420 0"
		gui_group = "Group 01"
		enable = "1"
		input_node = "Multiply scalar 03"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "Multiply scalar 02"
		>
	</add_scalar>
	<multiply_scalar
		name = "Multiply scalar 04"
		gui_use_node_pos = "1"
		gui_node_pos = "-540 1460 0"
		gui_group = "Group 01"
		enable = "1"
		input_node = "Cos scalar 01"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "Divide scalar 01"
		>
	</multiply_scalar>
	<multiply_scalar
		name = "Multiply scalar 03"
		gui_use_node_pos = "1"
		gui_node_pos = "-720 1460 0"
		gui_group = "Group 01"
		enable = "1"
		input_node = "Cos scalar 02"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "Divide scalar 01"
		>
	</multiply_scalar>
	<multiply_scalar
		name = "Multiply scalar 02"
		gui_use_node_pos = "1"
		gui_node_pos = "-540 1540 0"
		gui_group = "Group 01"
		enable = "1"
		input_node = "Floor scalar 01"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "LargeScale = 100 m"
		>
	</multiply_scalar>
	<cos_scalar
		name = "Cos scalar 02"
		gui_use_node_pos = "1"
		gui_node_pos = "-720 1500 0"
		gui_group = "Group 01"
		enable = "1"
		input_node = "Add scalar 02"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		>
	</cos_scalar>
	<cos_scalar
		name = "Cos scalar 01"
		gui_use_node_pos = "1"
		gui_node_pos = "-540 1500 0"
		gui_group = "Group 01"
		enable = "1"
		input_node = "Add scalar 01"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		>
	</cos_scalar>
	<add_scalar
		name = "Add scalar 02"
		gui_use_node_pos = "1"
		gui_node_pos = "-720 1540 0"
		gui_group = "Group 01"
		enable = "1"
		input_node = "Square root scalar 01"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "Add scalar 01"
		>
	</add_scalar>
	<add_scalar
		name = "Add scalar 01"
		gui_use_node_pos = "1"
		gui_node_pos = "-540 1580 0"
		gui_group = "Group 01"
		enable = "1"
		input_node = "Constant (0.25)"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "Multiply scalar 01"
		>
	</add_scalar>
	<multiply_scalar
		name = "Multiply scalar 01"
		gui_use_node_pos = "1"
		gui_node_pos = "-540 1620 0"
		gui_group = "Group 01"
		enable = "1"
		input_node = "Square root scalar 01"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "Floor scalar 01"
		>
	</multiply_scalar>
	<square_root_scalar
		name = "Square root scalar 01"
		gui_use_node_pos = "1"
		gui_node_pos = "-720 1660 0"
		gui_group = "Group 01"
		enable = "1"
		input_node = "Constant (3)"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		>
	</square_root_scalar>
	<constant_scalar
		name = "Constant (3)"
		gui_use_node_pos = "1"
		gui_node_pos = "-720 1700 0"
		gui_group = "Group 01"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		scalar = "3"
		>
	</constant_scalar>
	<floor_scalar
		name = "Floor scalar 01"
		gui_use_node_pos = "1"
		gui_node_pos = "-540 1660 0"
		gui_group = "Group 01"
		enable = "1"
		input_node = "Divide scalar 02"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		>
	</floor_scalar>
	<divide_scalar
		name = "Divide scalar 02"
		gui_use_node_pos = "1"
		gui_node_pos = "-540 1700 0"
		gui_group = "Group 01"
		enable = "1"
		input_node = "Get position in geometry 01"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "LargeScale = 100 m"
		>
	</divide_scalar>
	<divide_scalar
		name = "Divide scalar 01"
		gui_use_node_pos = "1"
		gui_node_pos = "-360 1700 0"
		gui_group = "Group 01"
		enable = "1"
		input_node = "LargeScale = 100 m"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "Slope = 10 m"
		>
	</divide_scalar>
	<constant_scalar
		name = "Constant (0.25)"
		gui_use_node_pos = "1"
		gui_node_pos = "-720 1620 0"
		gui_group = "Group 01"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		scalar = "0.25"
		>
	</constant_scalar>
	<constant_scalar
		name = "Slope = 10 m"
		gui_use_node_pos = "1"
		gui_node_pos = "-180 1740 0"
		gui_group = "Group 01"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		scalar = "10"
		>
	</constant_scalar>
	<constant_scalar
		name = "LargeScale = 100 m"
		gui_use_node_pos = "1"
		gui_node_pos = "-360 1740 0"
		gui_group = "Group 01"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		scalar = "100"
		>
	</constant_scalar>
	<get_position_in_geometry
		name = "Get position in geometry 01"
		gui_use_node_pos = "1"
		gui_node_pos = "-540 1740 0"
		gui_group = "Group 01"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		>
	</get_position_in_geometry>
	<group
		name = "Group 01"
		gui_use_node_pos = "1"
		gui_node_pos = "-436 1392 0"
		gui_group = ""
		gui_node_size = "1450.034977 772.0159564 1"
		gui_node_colour = "0.5 0.5 0.5"
		special_group = "0"
		global_bookmark = "0"
		>
	</group>
</terragen_clip>