<terragen_clip>
	<build_colour
		name = "Build colour 01"
		gui_use_node_pos = "1"
		gui_node_pos = "-1520 -2120 0"
		gui_group = "Gradient"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		red_input = "B0 Conditional"
		green_input = "B0 Conditional"
		blue_input = "B0 Conditional"
		>
	</build_colour>
	<constant_scalar
		name = "Max altitude"
		gui_use_node_pos = "1"
		gui_node_pos = "-2800 1040 0"
		gui_group = "Gradient"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		scalar = "1000"
		>
	</constant_scalar>
	<constant_scalar
		name = "Min altitude"
		gui_use_node_pos = "1"
		gui_node_pos = "-2980 1040 0"
		gui_group = "Gradient"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		scalar = "400"
		>
	</constant_scalar>
	<get_altitude
		name = "Get altitude 01"
		gui_use_node_pos = "1"
		gui_node_pos = "-3200 1040 0"
		gui_group = "Gradient"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		>
	</get_altitude>
	<subtract_scalar
		name = "Subtract scalar 01"
		gui_use_node_pos = "1"
		gui_node_pos = "-3120 980 0"
		gui_group = "Gradient"
		enable = "1"
		input_node = "Get altitude 01"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "Min altitude"
		>
	</subtract_scalar>
	<subtract_scalar
		name = "Altitude range"
		gui_use_node_pos = "1"
		gui_node_pos = "-2920 980 0"
		gui_group = "Gradient"
		enable = "1"
		input_node = "Max altitude"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "Min altitude"
		>
	</subtract_scalar>
	<divide_scalar
		name = "Divide scalar 06"
		gui_use_node_pos = "1"
		gui_node_pos = "-3060 840 0"
		gui_group = "Gradient"
		enable = "1"
		input_node = "Subtract scalar 01"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "Altitude range"
		>
	</divide_scalar>
	<clamp_0_1_scalar
		name = "Adjusted Altitude"
		gui_use_node_pos = "1"
		gui_node_pos = "-2480 -1520 0"
		gui_group = "Gradient"
		enable = "1"
		input_node = "Divide scalar 06"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		>
	</clamp_0_1_scalar>
	<constant_scalar
		name = "B Altitude 0"
		gui_use_node_pos = "1"
		gui_node_pos = "-2200 -1420 0"
		gui_group = "Gradient"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		scalar = "0"
		>
	</constant_scalar>
	<subtract_scalar
		name = "B dCol2"
		gui_use_node_pos = "1"
		gui_node_pos = "-1680 -1300 0"
		gui_group = ""
		enable = "1"
		input_node = "B Colour 1"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "B Colour 2"
		>
	</subtract_scalar>
	<subtract_scalar
		name = "B dCol1"
		gui_use_node_pos = "1"
		gui_node_pos = "-1680 -1380 0"
		gui_group = ""
		enable = "1"
		input_node = "B Colour 1"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "B Colour 0"
		>
	</subtract_scalar>
	<subtract_scalar
		name = "B dAlt1"
		gui_use_node_pos = "1"
		gui_node_pos = "-2040 -1380 0"
		gui_group = ""
		enable = "1"
		input_node = "B Altitude 1"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "B Altitude 0"
		>
	</subtract_scalar>
	<subtract_scalar
		name = "B dAlt2"
		gui_use_node_pos = "1"
		gui_node_pos = "-2040 -1300 0"
		gui_group = ""
		enable = "1"
		input_node = "B Altitude 2"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "B Altitude 1"
		>
	</subtract_scalar>
	<conditional_scalar
		name = "B0 Conditional_1"
		gui_use_node_pos = "1"
		gui_node_pos = "-2240 -1680 0"
		gui_group = ""
		enable = "1"
		input_node = "Adjusted Altitude"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		condition = "5"
		comparison_value = "B Altitude 2"
		if_result = "B0 Add_1"
		else_result = "B dCol2"
		>
	</conditional_scalar>
	<subtract_scalar
		name = "B0 Subtract_1"
		gui_use_node_pos = "1"
		gui_node_pos = "-2080 -1680 0"
		gui_group = ""
		enable = "1"
		input_node = "B Altitude 2"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "Adjusted Altitude"
		>
	</subtract_scalar>
	<divide_scalar
		name = "B0 Divide_1"
		gui_use_node_pos = "1"
		gui_node_pos = "-1920 -1640 0"
		gui_group = ""
		enable = "1"
		input_node = "B dCol2"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "B dAlt2"
		>
	</divide_scalar>
	<multiply_scalar
		name = "B0 Multiply_1"
		gui_use_node_pos = "1"
		gui_node_pos = "-1920 -1680 0"
		gui_group = ""
		enable = "1"
		input_node = "B0 Subtract_1"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "B0 Divide_1"
		>
	</multiply_scalar>
	<divide_scalar
		name = "B0 Divide"
		gui_use_node_pos = "1"
		gui_node_pos = "-1920 -1720 0"
		gui_group = ""
		enable = "1"
		input_node = "B dCol1"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "B dAlt1"
		>
	</divide_scalar>
	<add_scalar
		name = "B0 Add_1"
		gui_use_node_pos = "1"
		gui_node_pos = "-1760 -1680 0"
		gui_group = ""
		enable = "1"
		input_node = "B0 Multiply_1"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "B Colour 2"
		>
	</add_scalar>
	<add_scalar
		name = "B0 Add"
		gui_use_node_pos = "1"
		gui_node_pos = "-1760 -1760 0"
		gui_group = ""
		enable = "1"
		input_node = "B0 Multiply"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "B Colour 0"
		>
	</add_scalar>
	<multiply_scalar
		name = "B0 Multiply"
		gui_use_node_pos = "1"
		gui_node_pos = "-1920 -1760 0"
		gui_group = ""
		enable = "1"
		input_node = "B0 Subtract"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "B0 Divide"
		>
	</multiply_scalar>
	<subtract_scalar
		name = "B0 Subtract"
		gui_use_node_pos = "1"
		gui_node_pos = "-2080 -1760 0"
		gui_group = ""
		enable = "1"
		input_node = "Adjusted Altitude"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "B Altitude 0"
		>
	</subtract_scalar>
	<group
		name = "Blue Gradient"
		gui_use_node_pos = "1"
		gui_node_pos = "-1757.65 -1641.39 0"
		gui_group = "Gradient"
		gui_node_size = "1190.17 834.799 1"
		gui_node_colour = "0 0 1"
		special_group = "0"
		global_bookmark = "0"
		>
	</group>
	<conditional_scalar
		name = "B0 Conditional"
		gui_use_node_pos = "1"
		gui_node_pos = "-2240 -1760 0"
		gui_group = "Blue Gradient"
		enable = "1"
		input_node = "Adjusted Altitude"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		condition = "5"
		comparison_value = "B Altitude 1"
		if_result = "B0 Add"
		else_result = "B0 Conditional_1"
		>
	</conditional_scalar>
	<constant_scalar
		name = "B Colour 0"
		gui_use_node_pos = "1"
		gui_node_pos = "-1840 -1420 0"
		gui_group = "Blue Gradient"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		scalar = "0.2"
		>
	</constant_scalar>
	<constant_scalar
		name = "B Altitude 2"
		gui_use_node_pos = "1"
		gui_node_pos = "-2200 -1260 0"
		gui_group = "Blue Gradient"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		scalar = "1"
		>
	</constant_scalar>
	<constant_scalar
		name = "B Altitude 1"
		gui_use_node_pos = "1"
		gui_node_pos = "-2200 -1340 0"
		gui_group = "Blue Gradient"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		scalar = "0.65098"
		>
	</constant_scalar>
	<constant_scalar
		name = "B Colour 1"
		gui_use_node_pos = "1"
		gui_node_pos = "-1840 -1340 0"
		gui_group = "Blue Gradient"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		scalar = "0.960784"
		>
	</constant_scalar>
	<constant_scalar
		name = "B Colour 2"
		gui_use_node_pos = "1"
		gui_node_pos = "-1840 -1260 0"
		gui_group = "Blue Gradient"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		scalar = "0.313725"
		>
	</constant_scalar>
</terragen_clip>