<terragen_clip>
	<square_scalar
		name = "Square (Final Disp))"
		gui_use_node_pos = "1"
		gui_node_pos = "-2320 960 0"
		gui_group = "Polygon"
		enable = "1"
		input_node = "Multiply scalar 02"
		gui_use_preview_patch_size = "1"
		gui_preview_patch_size = "16000 16000"
		>
	</square_scalar>
	<subtract_scalar
		name = "Subtract scalar 02"
		gui_use_node_pos = "1"
		gui_node_pos = "-2140 1140 0"
		gui_group = "Polygon"
		enable = "1"
		input_node = "f*Outer"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "f*Inner"
		>
	</subtract_scalar>
	<clamp_0_1_scalar
		name = "Polygon factor"
		gui_use_node_pos = "1"
		gui_node_pos = "-2060 1240 0"
		gui_group = "Polygon"
		enable = "1"
		input_node = "/Group 01/factor"
		gui_use_preview_patch_size = "1"
		gui_preview_patch_size = "16000 16000"
		>
	</clamp_0_1_scalar>
	<multiply_scalar
		name = "f*Outer"
		gui_use_node_pos = "1"
		gui_node_pos = "-1980 1200 0"
		gui_group = "Polygon"
		enable = "1"
		input_node = "Polygon factor"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "Outer (1400)"
		>
	</multiply_scalar>
	<multiply_scalar
		name = "f*Inner"
		gui_use_node_pos = "1"
		gui_node_pos = "-2140 1200 0"
		gui_group = "Polygon"
		enable = "1"
		input_node = "Inner (1000)"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "Polygon factor"
		>
	</multiply_scalar>
	<constant_scalar
		name = "Constant (4)"
		gui_use_node_pos = "1"
		gui_node_pos = "-2140 1080 0"
		gui_group = "Polygon"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		scalar = "4"
		>
	</constant_scalar>
	<group
		name = "Polygon"
		gui_use_node_pos = "1"
		gui_node_pos = "-2144 1077 0"
		gui_group = ""
		gui_node_size = "933.387 499.156 1"
		gui_node_colour = "0.2195 0 1"
		special_group = "0"
		global_bookmark = "0"
		>
		<constant_scalar
			name = "PI"
			gui_use_node_pos = "1"
			gui_node_pos = "0 280 0"
			gui_group = ""
			enable = "1"
			input_node = ""
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			scalar = "3.14159"
			>
		</constant_scalar>
		<divide_scalar
			name = "Angle u"
			gui_use_node_pos = "1"
			gui_node_pos = "0 200 0"
			gui_group = ""
			enable = "1"
			input_node = "PI"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "/Polygon Sides (6)"
			>
		</divide_scalar>
		<add_scalar
			name = "2u"
			gui_use_node_pos = "1"
			gui_node_pos = "0 140 0"
			gui_group = ""
			enable = "1"
			input_node = "Angle u"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Angle u"
			>
		</add_scalar>
		<divide_vector
			name = "Normalized Vector"
			gui_use_node_pos = "1"
			gui_node_pos = "-360 400 0"
			gui_group = ""
			enable = "1"
			input_node = "/Focus"
			gui_use_preview_patch_size = "1"
			gui_preview_patch_size = "32000 32000"
			input_2 = "/Length to scalar 01"
			>
		</divide_vector>
		<x_to_scalar
			name = "X to scalar 01"
			gui_use_node_pos = "1"
			gui_node_pos = "-400 360 0"
			gui_group = ""
			enable = "1"
			input_node = "Normalized Vector"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			>
		</x_to_scalar>
		<arccos_scalar
			name = "Arccos scalar 01"
			gui_use_node_pos = "1"
			gui_node_pos = "-400 320 0"
			gui_group = ""
			enable = "1"
			input_node = "X to scalar 01"
			gui_use_preview_patch_size = "1"
			gui_preview_patch_size = "128000 128000"
			>
		</arccos_scalar>
		<z_to_scalar
			name = "Z to scalar 01"
			gui_use_node_pos = "1"
			gui_node_pos = "-220 360 0"
			gui_group = ""
			enable = "1"
			input_node = "Normalized Vector"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			>
		</z_to_scalar>
		<floor_scalar
			name = "Floor scalar 01"
			gui_use_node_pos = "1"
			gui_node_pos = "-220 320 0"
			gui_group = ""
			enable = "1"
			input_node = "Z to scalar 01"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			>
		</floor_scalar>
		<add_scalar
			name = "Add scalar 02"
			gui_use_node_pos = "1"
			gui_node_pos = "-220 280 0"
			gui_group = ""
			enable = "1"
			input_node = "Floor scalar 01"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Floor scalar 01"
			>
		</add_scalar>
		<subtract_scalar
			name = "Subtract scalar 03"
			gui_use_node_pos = "1"
			gui_node_pos = "-400 220 0"
			gui_group = ""
			enable = "1"
			input_node = "Arccos scalar 01"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "PI"
			>
		</subtract_scalar>
		<multiply_scalar
			name = "Multiply scalar 03"
			gui_use_node_pos = "1"
			gui_node_pos = "-220 180 0"
			gui_group = ""
			enable = "1"
			input_node = "Subtract scalar 03"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Add scalar 02"
			>
		</multiply_scalar>
		<add_scalar
			name = "Add scalar 03"
			gui_use_node_pos = "1"
			gui_node_pos = "-400 140 0"
			gui_group = ""
			enable = "1"
			input_node = "Subtract scalar 03"
			gui_use_preview_patch_size = "1"
			gui_preview_patch_size = "64000 64000"
			input_2 = "Multiply scalar 03"
			>
		</add_scalar>
		<modulo_scalar
			name = "Modulo scalar 01"
			gui_use_node_pos = "1"
			gui_node_pos = "-220 100 0"
			gui_group = ""
			enable = "1"
			input_node = "Add scalar 03"
			gui_use_preview_patch_size = "1"
			gui_preview_patch_size = "32000 32000"
			input_2 = "2u"
			>
		</modulo_scalar>
		<subtract_scalar
			name = "Subtract scalar 04"
			gui_use_node_pos = "1"
			gui_node_pos = "-220 60 0"
			gui_group = ""
			enable = "1"
			input_node = "Modulo scalar 01"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			input_2 = "Angle u"
			>
		</subtract_scalar>
		<cos_scalar
			name = "Cos scalar 01"
			gui_use_node_pos = "1"
			gui_node_pos = "-220 20 0"
			gui_group = ""
			enable = "1"
			input_node = "Subtract scalar 04"
			gui_use_preview_patch_size = "1"
			gui_preview_patch_size = "128000 128000"
			>
		</cos_scalar>
		<cos_scalar
			name = "Cos scalar 02"
			gui_use_node_pos = "1"
			gui_node_pos = "-40 20 0"
			gui_group = ""
			enable = "1"
			input_node = "Angle u"
			gui_use_preview_patch_size = "0"
			gui_preview_patch_size = "1000 1000"
			>
		</cos_scalar>
		<divide_scalar
			name = "factor"
			gui_use_node_pos = "1"
			gui_node_pos = "-140 -40 0"
			gui_group = ""
			enable = "1"
			input_node = "Cos scalar 02"
			gui_use_preview_patch_size = "1"
			gui_preview_patch_size = "32000 32000"
			input_2 = "Cos scalar 01"
			>
		</divide_scalar>
	</group>
	<complement_scalar
		name = "Complement scalar 01"
		gui_use_node_pos = "1"
		gui_node_pos = "-2440 1040 0"
		gui_group = "Polygon"
		enable = "1"
		input_node = "Clamp 0 1 scalar 01"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		>
	</complement_scalar>
	<multiply_scalar
		name = "Multiply scalar 01"
		gui_use_node_pos = "1"
		gui_node_pos = "-2200 1040 0"
		gui_group = "Polygon"
		enable = "1"
		input_node = "Clamp 0 1 scalar 01"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "Constant (4)"
		>
	</multiply_scalar>
	<multiply_scalar
		name = "Multiply scalar 02"
		gui_use_node_pos = "1"
		gui_node_pos = "-2320 1000 0"
		gui_group = "Polygon"
		enable = "1"
		input_node = "Complement scalar 01"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "Multiply scalar 01"
		>
	</multiply_scalar>
	<subtract_scalar
		name = "Subtract scalar 01"
		gui_use_node_pos = "1"
		gui_node_pos = "-2320 1160 0"
		gui_group = "Polygon"
		enable = "1"
		input_node = "Length to scalar 01"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "f*Inner"
		>
	</subtract_scalar>
	<constant_scalar
		name = "Outer (1400)"
		gui_use_node_pos = "1"
		gui_node_pos = "-1980 1280 0"
		gui_group = "Polygon"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		scalar = "1400"
		>
	</constant_scalar>
	<constant_scalar
		name = "Inner (1000)"
		gui_use_node_pos = "1"
		gui_node_pos = "-2140 1280 0"
		gui_group = "Polygon"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		scalar = "1000"
		>
	</constant_scalar>
	<get_position_in_geometry
		name = "Get position in geometry 01"
		gui_use_node_pos = "1"
		gui_node_pos = "-2500 1280 0"
		gui_group = "Polygon"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		>
	</get_position_in_geometry>
	<constant_vector
		name = "[2500, 0, 2500]"
		gui_use_node_pos = "1"
		gui_node_pos = "-2320 1280 0"
		gui_group = "Polygon"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		vector = "2500 0 2500"
		>
	</constant_vector>
	<subtract_vector
		name = "Focus"
		gui_use_node_pos = "1"
		gui_node_pos = "-2320 1240 0"
		gui_group = "Polygon"
		enable = "1"
		input_node = "Get position in geometry 01"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		input_2 = "[2500, 0, 2500]"
		>
	</subtract_vector>
	<length_to_scalar
		name = "Length to scalar 01"
		gui_use_node_pos = "1"
		gui_node_pos = "-2320 1200 0"
		gui_group = "Polygon"
		enable = "1"
		input_node = "Focus"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		>
	</length_to_scalar>
	<constant_scalar
		name = "Polygon Sides (6)"
		gui_use_node_pos = "1"
		gui_node_pos = "-1820 1280 0"
		gui_group = "Polygon"
		enable = "1"
		input_node = ""
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		scalar = "6"
		>
	</constant_scalar>
	<divide_scalar
		name = "Divide scalar 01"
		gui_use_node_pos = "1"
		gui_node_pos = "-2320 1120 0"
		gui_group = "Polygon"
		enable = "1"
		input_node = "Subtract scalar 01"
		gui_use_preview_patch_size = "1"
		gui_preview_patch_size = "4000 4000"
		input_2 = "Subtract scalar 02"
		>
	</divide_scalar>
	<clamp_0_1_scalar
		name = "Clamp 0 1 scalar 01"
		gui_use_node_pos = "1"
		gui_node_pos = "-2320 1080 0"
		gui_group = "Polygon"
		enable = "1"
		input_node = "Divide scalar 01"
		gui_use_preview_patch_size = "0"
		gui_preview_patch_size = "1000 1000"
		>
	</clamp_0_1_scalar>
</terragen_clip>