Print Page - Color

Title: Color
Post by: R3igN on September 21, 2009, 01:56:07 PM

Hi ..

I'm having problem with applying color..I hope someone could help me.. :)

(http://img223.imageshack.us/img223/1931/83471896.jpg)

I add power fractal in the color function of my surface layer and i cant seem to have any colors..
The nodes is above ..am i doin it wrong?

Title: Re: Color
Post by: tempaccount on September 21, 2009, 01:57:38 PM

Is apply color enabled from the surface layer node itself?

Title: Re: Color
Post by: R3igN on September 21, 2009, 02:02:59 PM

ofcourse

Title: Re: Color
Post by: Volker Harun on September 21, 2009, 02:51:40 PM

You have your surface layer 2 pluuged into the breakup of Layer 1 ... this can feed in colour, but I think you wanted to use the Child input left to it.
The power fractal shader v3 03 is going into the colour function of Layer 1, if this Power fractal (PF) has no colour, or just black, there will be no colour at all. ;D

Volker

Title: Re: Color
Post by: R3igN on September 21, 2009, 10:23:41 PM

there is color in the PF...

I put the surface layer 2 into childlayer back to surface layer 1 still no color... :(

Im still working on it...Heres the image.. :)

(http://img401.imageshack.us/img401/8060/99973056.png)

Title: Re: Color
Post by: FrankB on September 23, 2009, 02:20:04 AM

you should better post the tgd, otherwise a lot of people will waste time guessing ;-)

Title: Re: Color
Post by: R3igN on September 23, 2009, 03:30:13 AM

I figured it out...Thnx anyways.. :)

Planetside Software Forums

General => Terragen Discussion => Topic started by: R3igN on September 21, 2009, 01:56:07 PM