Cloud test issue

Started by AP, December 24, 2016, 03:46:37 am

Previous topic - Next topic

AP

If anyone can figure this out that will be most welcome. Issue being is the clouds are supposed to reveal some size subtraction at the assigned altitudes from the surface layers attached to the cloud density, however nothing is changing.

Kadri


Try something like -50 in the "Limit maximum altitude".

fleetwood

December 24, 2016, 01:16:17 pm #2 Last Edit: December 24, 2016, 01:17:54 pm by fleetwood
I found it fastest to see what was happening by using only one of the restricting surface layers connected to the cloud at a time. Then while using the RTP with atmosphere display active I could just slide the surface layer's altitude value up and down until various effects started to show up.
Got this type of thing eventually.

AP

December 24, 2016, 05:13:14 pm #3 Last Edit: December 24, 2016, 05:18:35 pm by AP
Quote from: Kadri on December 24, 2016, 09:57:31 am

Try something like -50 in the "Limit maximum altitude".


It just shrinks the entire cloud as if the altitude limits are not doing anything. Strange it was working at one point.

AP

Quote from: fleetwood on December 24, 2016, 01:16:17 pm
I found it fastest to see what was happening by using only one of the restricting surface layers connected to the cloud at a time. Then while using the RTP with atmosphere display active I could just slide the surface layer's altitude value up and down until various effects started to show up.
Got this type of thing eventually.


It seems to be working but I will have to test this some more. It seems very iffy at times.

Kadri

December 24, 2016, 05:53:45 pm #5 Last Edit: December 24, 2016, 05:57:37 pm by Kadri

This is an example. Not sure if it helps.

Edit: By the way "Final position" isn't important here. It was just a leftover from playing around.

AP

Thank you. I think I figured it out as I might as overlooked something in there, that or something else was happening. A bit of a meticulous thing.

Kadri

Quote from: AP on December 24, 2016, 09:39:15 pm
Thank you. I think I figured it out as I might as overlooked something in there, that or something else was happening. A bit of a meticulous thing.


Happens all the time to me. Especially with those slope and altitude options.

AP

December 26, 2016, 05:09:32 am #8 Last Edit: December 26, 2016, 06:38:52 am by AP
Indeed.

KlausK

...this is fun ::)
/ ASUS WS Mainboard / Dual XEON E5-2640v3 / 64GB RAM / NVIDIA GeForce GTX 1070 TI / Win7 Ultimate

Dune

It certainly is. You can animate a disintegrating UFO now ;)